Samsung SCX-3405FW, SCX3405FWXAC manual Setting up Wi-Fi Direct, Turning the Wi-Fi network on/off

Wireless network setup

Disconnect the network cable (standard or network). Your machine should then start communicating wirelessly with the network. In case of Ad-hoc mode, you can use a wireless LAN and wired LAN simultaneously.

Turning the Wi-Fi network on/off

5When the SyncThru™ Web Service window opens, click Network Settings.

6Click Wireless > Custom.

You can also turn the Wi-Fi network on/off.

Setting the Wi-Fi Direct for mobile printing

If your machine has a display, you can also turn on/off the Wi-Fi from the machine’s control panel using the Network menu.

1Check whether the network cable is connected to the machine. If not, connect the machine with a standard network cable.

2Start a web browser such as Internet Explorer, Safari, or Firefox and enter your machine’s new IP address in the browser window.

For example,

3Click Login on the upper right of the SyncThru™ Web Service website.

4Type in the ID and Password, then click Login.

•ID: admin

•Password: sec00000

Wi-Fi Direct is an easy-to-setup peer-to-peer connecting between method for your printer and a mobile device that provides a secure connection and better throughput than ad hoc mode.

With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while concurrently connecting to an access point, You can also use a wired network and a Wi-Fi Direct network simultaneously so multiple users can access and print documents both from Wi-Fi Direct and from a wired network.

• You cannot connect to the internet through the printer’s Wi-Fi Direct.

•The supported protocol list may differ from your model, Wi-Fi Direct networks do NOT support IPv6, network filtering, IPSec, WINS, and SLP services.

Setting up Wi-Fi Direct

You can enable Wi-Fi Direct feature by one of the following methods.

2. Using a Network-Connected Machine 183