Samsung VP-M110R/XEC, VP-M110R/XEF, VP-M110R/KNT manual Viewing the Demonstration Zobrazení ukázky

ENGLISH
System Menu Setting	Nastavení systémové nabídky

âESKY

Viewing the Demonstration		Zobrazení ukázky
✤ Before you begin: Make sure that there is no tape inserted in the Camcorder.		✤ Pfied tím, neÏ zaãnete: Ujistûte se, Ïe ve videokamefie není kazeta.
(see page 36)		(viz strana 36)
✤ Demonstration automatically shows you the major functions		✤ Ukázka automaticky pfiedvede hlavní funkce
that are included with your Camcorder so that you may use	1	videokamery, abyste je mohli snadnûji pouÏívat.
them more easily.		✤ Funkci Ukázka lze pouÏít pouze v reÏimu videokamera
✤ The Demonstration function may only be used in the Camera mode		bez vloÏené kazety ve videokamefie.
without a tape inserted in the Camcorder.		✤ Funkce Ukázka se provádí opakovanû, dokud není tento
✤ The Demonstration operates repeatedly until the		reÏim nastaven na Off (Vypnout).
Demonstration mode switched off.

1.	Set the Power switch to CAMERA.
2.	Set the Mode switch to TAPE.	4
	(VP-D453(i)/D454(i)/D455(i) only)		Camera Mode
3.	Press the MENU button.		√System
	■ The menu list will appear.		Clock Set
			Beep Sound		√On
4.	Move the Menu selector to the left or right to select
			USB Version		√USB 2.0
	System, then press the Menu selector.		Language		√English
5.	Move the Menu selector to the left or right to select		Demonstration		√On
	Demonstration, then press the Menu selector.		Move	Select		MENU Exit
6.	Move the Menu selector to the left or right to select On,
	then press the Menu selector.	6
7.	Press the MENU button.		Camera Mode
	■ The Demonstration will begin.		Back
8.	To quit the Demonstration, press the MENU button.		Clock Set
			Beep Sound
			USB Version
			Language
[ Notes ]			Demonstration		Off
					On
	The Demonstration mode is automatically activated when		Move			MENU Exit
■				Select
	the Camcorder is left idle for more than
	10 minutes after switching to the Camera mode (no tape is		Samsung Camcorder is...
	inserted in the Camcorder).

■If you press other buttons (FADE, BLC, PHOTO, EASY.Q, COLOR NITE/PB ZOOM) during the Demonstration mode, the

demonstration stops temporarily and resumes 10 minutes later if [Digital Camcorder]

you do not operate any other functions.

Demonstration

1.Vypínaã Power pfiepnûte do polohy CAMERA.

2.Pfiepínaã Mode nastavte do polohy TAPE. (pouze VP-D453(i)/D454(i)/D455(i))

3.Stisknûte tlaãítko MENU.

■Zobrazí se seznam nabídek.

4.Pohybem ovladaãe Menu doleva ãi doprava vyberte poloÏku System (Systém), poté ovladaã stisknûte.

5.Pohybem ovladaãe Menu doleva ãi doprava vyberte poloÏku Demonstration (Ukázka), poté ovladaã stisknûte.

6.Pohybem ovladaãe Menu doleva ãi doprava vyberte poloÏku On (Zapnout), poté ovladaã stisknûte.

7.Stisknûte tlaãítko MENU.

■Ukázka zaãne.

8.Pro ukonãení ukázky stisknûte tlaãítko MENU.

[ Poznámky ]

■Pokud se s videokamerou po pfiepnutí do reÏimu Videokamera neprovádí více neÏ 10 minut Ïádná akce, bude automaticky spu‰tûn reÏim Ukázka (pokud není ve videokamefie vloÏena Ïádná kazeta).

■Pokud stisknete v reÏimu Ukázka jiné tlaãítko (FADE, BLC, PHOTO, EASY.Q, COLOR NITE/PB ZOOM), ukázka se doãasnû zastaví a pokud neprovedete Ïádnou akci pokraãuje po deseti minutách.

31