6.Respond to the prompt by saying the name or group name.

To place the call, press and hold . (See “Making and Receiving a Sprint PCS Ready Link Call” on page 142 for details.)

To display other Contacts list, press Go to (left softkey), highlight your desired list, and press . (See “Selecting Contacts List” on page 142.)

To display the Ready Link options, press Options (right softkey) highlight your desired option, and press . (See “Sprint PCS Ready Link Options” on page 148.)

Tip: If you say “Contact” or “Dial Number” during step 3 on the previous page, you can say following commands continuously (e.g. “Contact, John Jones” or “Dial Number, 999-999-9999”).

Tip: To redial the last Sprint PCS Ready Link call by using ASR with the flip open,

press and hold on the side of your phone and follow the voice prompts.

Tip: You can also make a Sprint PCS Ready Link call to Contact, Group, and dialed

number by using ASR with the flip closed. Press and hold , and follow the voice prompts.

Using DigitTraining

This feature allows you to train the phone to recognize your voice. You can get better recognition accuracy by programming your intonation pattern into your phone.

To program DigitTraining:

1.Press and hold or to activate the Command menu.

2.Say “Digit Training.”

3.Say “Start” to start programming.

4.Follow the voice prompts and recite the digits into your phone’s microphone. (A voice prompt will indicate the current rate of adaptation.)

5.Respond to the voice prompt repeatedly until adaptation is complete. (When you are finished training, you will hear a confirmation that the adaptation has been successfully completed.)

Note: Try digit training in a quiet environment for the best results. When you train, make sure you speak clearly and distinctly in your natural voice.

Section 2I: Using Your Phone’s Voice Services

131

Page 144
Image 144
Sanyo MM-7400 manual Using DigitTraining, To program DigitTraining, Using Your Phone’s Voice Services 131