Selecting a Ringer and ImageType for an Entry

You can assign a ringer or an image type to a Contacts entry so you can identify the caller by the ringer or image type. (See “Ringer Types” on page 39.)

To select a ringer type for an entry:

1.Press the navigation key right.

2.Select the entry for which you want to set the incoming ringer and press .

3.Select a phone number, press Options (right softkey), highlight

Edit, and press .

– or –

Select an email address or Web address and press Edit (right softkey).

4.Scroll to Ringer and press .

5.Scroll to your desired ringer and press . (When you highlight a ringer type, a sample ringer will sound.)

6.Press Save (left softkey) to save the ringer type.

To confirm the ringer, highlight Ringer and press Play (right softkey).

To select an image type for an entry:

1.Follow steps 1-3 above.

2.Scroll to Picture ID and press .

3.Scroll to your desired image and press .

4.Press Save (left softkey) to save the image type.

To see a display preview of an image, press Preview (right softkey) during step 4 above. Press the right softkey to switch between Main/Sub LCD’s display preview.

Note: If you set an animation ringer (indicated with the icon) and an image, your Sprint PCS Phone plays the ringer (audio) of the animation ringer and displays the image you selected.

Section 2G: Using the Contacts Directory

100

Page 113
Image 113
Sanyo MM-7400 manual Selecting a Ringer and ImageType for an Entry, To select a ringer type for an entry