SATO CT400, CT410 manual Print Speed, ESCCS3

Section 4. Programming Reference

Print Speed

Command Structure	<ESC>CSa
	a	=	1	2 ips (50 mm/s)
		=	2	3 ips (75 mm/s)
		=	3	4 ips (100 mm/s)
		=	5	5 ips (125 mm/s)
		=	6	6 ips (150 mm/s)
	Example:			<ESC>CS3
	Placement:			Must be placed immediately after <ESC>A and
				immediately before <ESC>Z in its own separate data stream
	Default:			As previously set in the printer configuration
Command Function	To specify a unique print speed through software for a particular
	label. This allows flexibility in finding the best performance and quality
	for the particular label format, media, and ribbon. All subsequent
	labels will print at this speed unless the speed is changed with this
	command or through the Operator Panel.
Input to Printer	<ESC>A
	<ESC>CS5
	<ESC>Z
Printer Output	There is no printer output for this command. It sets the print speed of
	the printer.
Special Notes	1. This becomes the new setting in the printer configuration for all
		subsequent print jobs, unless changed. The setting is stored in
		non-volatile memory and is not affected by cycling the power.

2. Parameters of “5” and “6” are not valid for the CT410.

SATO CT Series Printers 9001069A Page 4-61