SATO CT410, CT400 manual Narrow Bar, Width mils Factor

Appendix B: Bar Code Specifications

UPC-A/EAN-13

Command Structure <ESC>B3bbccc (data) <ESC>D3bbccc (data) <ESC>BD3bbccc (data)

bb	= Width of narrow element in dots (01-12)
ccc	=	Bar height in dots (001-600)
(data)	=	Bar code data (numeric); must be exactly 13 digits. For
		UPC-A, the first digit must be a zero and the last 11 digits
		are the actual UPC-A data followed by a check digit.

To select UPC-A, 11 digits of data is sent. The printer adds a “0” and automatically generates the check digit. If 12 digits of data are sent, the printer assumes an EAN-13 symbol and automatically generates the check digit. The last digit of the bar code data is a modulo 10 check digit. If 13 digits of data are sent to the printer, the check digit is not created and must be supplied by the programmer. It must be the last character in the 13 digit string and can be determined by using the calculations outlined below.

Character Set	0-9 (numeric only)
Density Table
	Printer	Value of “bb”	Narrow Bar	Magnification
	Model		Width (mils)	Factor
		02	6.7	Below Minimum
	CT410
		03	10.0	75%
		04	13.3	100%
		02	10.0	75%
	CT400
		03	15.0	112%
		04	20.0	150%

Notes	D3 provides guide bars that extend longer than the rest of the bar
	code. BD3 provides guide bars and the human readable text below
	the symbol.
Example	<ESC>H0100<ESC>V0375<ESC>BD30215001234567890

SATO Ct Series Printers 9001069A Page B-5