SATO CT400, CT410 manual IGa, I2abcde, Laabb, LDa,b,c,d,e,f,g,i

Appendix A: Command Quick Reference

INSTRUCTION	DESCRIPTION			PAGE
IGa	Sensor Type. Selects sensor used for label indexing.			Page 4-89
	a	= 0	Reflective (Eye-Mark) Sensor
		1	Transmissive (Gap) Sensor
		2	No sensor
I2abcde	Serial I/F Set. Sets operating parameters for optional serial interface.			Page 4-90

a= Baud rate select

09600 BPS

119200 BPS

238400 BPS

357600 BPS

b= Data bit select

08 data bits

17 data bits

c= Parity Select

0No parity

1Odd parity

2Even parity

d= Stop bit select

01 stop bit

12 stop bits

e= Protocol select

0Single Item buffer

1Multi Item buffer

2X-On/X-Off Flow Control

3Bi-Com Status Protocol

4Bi-Com Status Protocol 3. (Used only for software compatibility)

J	Journal Print. Provides the ability to print text line by line. Fixed			Page 4-47
	spacing between lines and characters.
Kab90cc	Recall Custom Designed Characters. Recalls for printing a custom			Page 4-19
	character stored by the Tabcc(data) command.
	a	= 1	16 x 16 matrix
		2	24 x 24 matrix
	b	= Indicates the format that data stream was stored in
		B	Binary
		H	Hexadecimal
	bb	= Memory location where the character was stored.
		Valid locations are 21 to 52 or “!” to “R” in hex values.
Laabb	Character Expansion. Expands characters in both directions.			Page 4-21
	aa	= Multiple to expand horizontally (01-12)
	bb	= Multiple to expand vertically (01-12)
LDa,b,c,d,e,f,g,i	Protocol Code Select. Selects the hexadecimal protocol codes to be			Page 4-82
	used. See Section 4: Programming Reference for details.
M	Font type. Specifies the 13W x 20H dot matrix font (including			Page 4-34
	descenders).

Page A-6 9001069A SATO CT Series Printers