SATO CT400, CT410 manual Journal Print, Input to Printer

Section 4. Programming Reference

Journal Print

Command Structure	<ESC>J
	Example:	See above
	Placement:	Immediately following <ESC>A
	Default:	None
Command Function	To print text in a line by line format on a label. By specifying this
	command, you automatically select Font XS with a Character
	Expansion of 2x2. You also establish a base reference point of
	H2,V2. The character pitch is 2 dots and the line gap is 16 dots.
	Simply issue an ASCII <CR> at the end of each text line.
Input to Printer	<ESC>A
	<ESC>J WITH THE JOURNAL FEATURE

YOU CAN PRINT TEXT WITHOUT USING ANY FONT COMMANDS OR POSITION COMMANDS <ESC>Q1<ESC>Z

Printer Output

Special Notes1. Journal mode assumes a maximum label width . Otherwise, you may print where there is no label and damage your print head.

2. It is effective only for the current print job.

SATO CT Series Printers 9001069A Page 4-47