SATO CT410, CT400 manual Line Feed, Command Structure

Section 4. Programming Reference

Line Feed

Command Structure	<ESC>Eaaa
	aaa =	Number of dots (001-999) between the bottom of the
		characters on one line to the top of the characters on
		the next line
	Example:	<ESC>E010
	Placement: Preceding the text that will use the line feed function
	Default:	None
Command Function	To print multiple lines of the same character size without specifying a
	new print position for each line. With the Line Feed command, specify
	the number of dots you want between each line. Then, send an ASCII
	<CR> at the end of each line of text. The printer automatically
	identifies the size of the last character, moves down the number of
	dots specified, and begins printing the next line.
Input to Printer	<ESC>A
	<ESC>E010<ESC>H0050<ESC>V0050<ESC>L0202<ESC>S

THIS IS THE 1ST LINE<CR> THIS IS THE 2ND LINE<CR> THIS IS THE 3RD LINE<CR> <ESC>Q1<ESC>Z

Printer Output

Special Notes	1.	This command can be used for text and for bar codes.
	2.	It is effective only for the current data stream.
	3.	When printing lines or boxes in the same data stream with the Line
		Feed command, the Lines and Boxes command should be
		specified last, preceding <ESC>Q Quantity command.

Page 4-52 9001069A SATO CT Series Printers