SATO CT400, CT410 manual Cut Last, Command Structure

Section 4. Programming Reference

Cut Last

Command Structure	<ESC>YC
	Example:	<ESC>YC
	Placement:	Separate data stream sent to the printer
	Default:	None
Command Function	To control the cutting of labels when using a SATO cutter unit with
	the printer. This command allows the cutting of a printed multi-part
	tag or label that is left in the printer after a job is cut using the
	<ESC>CT Cut command.
Input to Printer:	<ESC>A
	<ESC>YC
	<ESC>Z

Printer Output:This command will cut the feed the last printed label to the cut position, cut the label and then backfeed to the head position in preparation for printing the next job.

		Cut position		Head position
	Label A printed	A		B	C
	Labels B, C, D
	unprinted.
	Feed A to cut	A	B	C		D
	position
	Cut A		B	C		D
	Backfeed to			B	C	D
	place B at print
	position
Notes	1. You must have the optional printer Cutter to use this function.
	Contact your SATO representative for more information.

SATO CT Series Printers 9001069A Page 4-33