SATO CT410, CT400 manual Printer configuration until a new Base Reference Point

Section 4. Programming Reference

Special Notes	1.	Use of this command will set the Vertical/Horizontal Offset setting of
		the printer configuration until a new Base Reference Point
		command is issued or the setting is changed from the operator
		panel. See Section 2: Printer Configuration.
	2.	This command may be used more than once in a print job.
	3.	An alternative to using this command is to make changes to your
		current Horizontal and Vertical Print Position commands.
	Example:
		Let’s say the current base reference point is H=1, V=1 and you
		wish to move all the fields on your label downward vertically by
		150 dots. You could either (1) add the Base Reference Point
		command or (2) change all the vertical position commands by an
		additional 150 dots.
	4.	For a more detailed example of the Base Reference Point
		command, see “Print Area” in this section.
	5.	The allowable field ranges for this command are:
			CT400	CT410
	Horizontal		-0832 to 0832	-1248 to 1248
	aaaa
	Vertical		-3200 to 3200	-4800 to 4800
	bbbb

Page 4-18 9001069A SATO CT Series Printers