SATO LM408/412E manual 255mm other than the default setting

			Unit 4: Printer Configuration
			SERVICE MODE (TABLE 4-4)
MENU			DESCRIPTION
			Allows the selection of whether to accept the default setting or to set the backfeed distance (1-
			255mm) other than the default setting.
FORWARD / BACKFEED
DISTANCE	DEFAULT
			Allows the backfeed distance to be set. If using thermal transfer for printing, set the feed distance
			less than 30mm to avoid detection of the ribbon end by accident.
FORWARD / BACKFEED
DISTANCE	XXXMM
			Allows the hexadecimal code to be specified for the character replaced replaced with the Euro
			Character. The default is D5H.
EURO CODE		D5
			Allows the selection of the character set used by the printer. The world’s primary commercial
			languages are provided as options.
SELECT LANGUAGE
	ENGLISH
	FRENCH
	GERMAN
	SPANISH
	ITALIAN
	PORTUGESE
	ENGLISH
	ENGLISH
			Allows the selection of which type of operator programming will take priority precidence. By
			selecting the COMMAND option, downloaded command codes will be recognized by the printer
PRIORITY SETTING
			as most important where conflicting data exists.
COMMAND	LCD
			Selecting LCD, places programming through the operator panel as taking precedence.
			Allows the determination of whether to ignore the CAN and DLE commands used in bi-directional
			communications. This menu option will only be applicable if multi-item buffer has been chosen.
IGNORE	CAN/DLE
YES	NO
			Select the ENABLE option to set the printer to automatically notify when ribbon supply is nearly
			exhausted.
RIBBON NEAR END
ENABLE	DISABLE
			This menu screen allows the pulse width to be set if single-item buffer has been chosen. If single-
			item buffer has not been chosen, this setting will not have effect.
IEEE1284
ACK SIGNAL		XX.X
			Allows of the backfeed movement to be established. Two setting options are available.
BACKFEED SPEED
NORMAL	SLOW

LM408-412e Operator Manual 4-22 PN: 9001155A