SATO LM408/412E manual 11, Boot Download Mode, 4-14

Unit 4: Printer Configuration

BOOT DOWNLOAD MODE

This download mode is used when the Firmware becomes corrupted and the normal download mode is not successful. Allows the program to be downloaded from the host computer.

Figure 5-11 provides the specific sequence of events required by the operator, the printer, and the printer’s software. Use the printer’s operator panel to select and enter the required options.

Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.

DSW6: ON

LINE + FEED + POWER

No action, no change

BOOT DOWNLOADER

PRESS FEED KEY

LINE FEED

	PROGRAM DOWNLOAD
	READY
No action,	LINE	FEED	No action,
no change			no change
	Send data from
	host system
	Printer
	begins
	receiving
	data
	PROGRAM DOWNLOAD
	START > > >	END
	Download
	completed
	DOWNLOAD COMPLETE
	PRESS FEED KEY
	FEED	LINE	No action,
			no change

Power printer off, reset DSW6 to exit

Figure 4-11, Boot Download Mode

LM408-412e Operator Manual 4-14 PN: 9001155A