CALENDAR
00/00/00 00:00
IGNORE CR/LF
YES NO
Section 3. Configuration
1.Year - The first display shown will have the cursor over the two digit year selection. You can scroll through the dates by pressing the LINE/FEED keys. The year number will increase by one each time the LINE key is pressed until it reaches its maximum legal value (i.e., “99” for the year digits). Pressing the FEED key will decrease the year number.
2.Month - After you have set the correct year, pressing the ENTER key will advance the cursor to the two digit Month position. You can scroll through the numbers corresponding to the month by pressing the LINE key. The month number will increase by one each time the LINE key is pressed until it reaches a value of “12”. Pressing the FEED key will decrease the month number.
3.Day - After you have set the correct month, pressing the ENTER key will advance the cursor to the two digit Day position. You can scroll through the numbers corresponding to the month date by pressing the LINE and FEED keys. The date number will increase by one each time the LINE key is pressed until it reaches a value of “31”. Pressing the FEED key will decrease the day number.
4.Hour - After you have set the correct date, pressing the LINE key will advance the cursor to the two digit Hour position. You can scroll through the numbers corresponding to the hour (using a 24 hour clock) by pressing the LINE and FEED keys. The hour number will increase by one each time the LINE key is pressed until it reaches a value of “24”
.Pressing the FEED key will decrease the hour number.
5.Minute- After you have set the correct hour, pressing the ENTER key will advance the cursor to the two digit Minute position. You can scroll through the numbers corresponding to the hour by pressing the LINE and FEED keys. The minute number will increase by one each time the LINE key is pressed until it reaches a value of “60”. Pressing the FEED key will decrease the minute number.
6.After you have set the minutes, pressing the FEED key will accept the setting and advance to the Ignore CR/LF selection.
This selection tells the printer to strip out all carriage return/line feed pairs (CR/LF ) from the data stream, including graphics and 2D bar codes. It is used primrily to maintain compatibility with earlier models of SATO printers.
1.Use the LINE key to step the underline cusor to either the YES or NO selection.
2.Once the correct setting is underlined, pressing the FEED key will accept the setting and advance the display to the Character Pitch display.
SATO | PN 9001105 Rev. A | Page |
