Section 2. Installation
OPERATOR PANEL
The
Potentiometer to adjust print darkness (fine tuning) | |
OFFSET | Potentiometer to adjust amount of back/forward feed for dispenser/cutter/tear- |
| off position (+/- 3.75 mm) |
PITCH | Potentiometer to adjust home position of the label (+/- 3.75 mm). Affects stop |
| position of label feed, print position and dispense position. |
DISPLAY | Potentiometer to adjust the contrast of the LCD display. |
POWER | LED, illuminated when the power is on. |
LABEL | LED, illuminated when the label supply is not detected. |
RIBBON | LED, illuminated when the ribbon motion sensor does not detect any ribbon |
| motion (ribbout out condition). |
ERROR | LED, illuminated when there is a system fault such as an open print head. |
Page | PN 9001105 Rev. A | SATO |