SATO M8460S, XL400/410, M8490S, M8485S Memory Card Function Format/Field Store, ESCYS,aaESC/N,bb,cc

Programming Manual 2. Command Codes

Memory Card Function

Format/Field Store

Command Structure:

<ESC>YS,aa<ESC>/N,bb,cc{.......}

aa:Format number to be stored (01-99)

bb:Field number to be stored (01-99)

cc:Length of field to be stored (01-99)

{.....}:	Command stream describing the field to be stored.
Example:	<ESC>YS,01<ESC>/N,01,05
Placement:	Immediately after <ESC>CC Slot Select command.
Default:	None

Function:

To store a format field description in the memory card.

Input:

<ESC>A

<ESC>CC1

<ESC>YS,02<ESC>/N,01,13<ESC>V0100<ESC>H0100<ESC>XB1

<ESC>/N,02,13<ESC>V0200<ESC>H0200<ESC>XB1

<ESC>Z

Output:

There is no printer output as a result of this command. See <ESC>YR Format/Field Recall command.

Note:

1.This command requires the Memory Card option. See your SATO representative for details.

2.Each job should be sent individually. If more than one job is sent in a data stream, only the first one will be accepted and the remainder ignored.

3.The following commands cannot be stored in a format:

SATO RISC<ESC>PrintersCNULLQ/DEXT&S

CutExpPrintReCusomStorepecllaLabelndedQuantitySpedFormFieldLabelChractersOverlaybelStorage 105