Programming Manual

1. Introduction

 

 

1.Introduction

This manual presents the commands that are used with the SATO RISC Printers to produce labels with logos, bar codes and alphanumeric data. All of the RISC commands use the same syntax. Some commands refer- ence a physical point on the label using horizontal and vertical dot refer- ence numbers. The allowable range for these references is dependent upon the particular printer to accomodate different print widths and reso- lutions. These differences are noted in tables under the commands affected.

Introduction

Command Codes

Command Codes Quick Reference

Command Codes Specifications

Interface Specification

Troubleshooting

Custom Protocol Command Codes

HCustom Characters And Graphics

SATO RISC Printers

7

Page 7
Image 7
SATO CL608/612, XL400/410, M8460S, M8490S, M-8400RV, M8485S, M8459S, CL408/412 manual Introduction