SATO M8459S, XL400/410, M8460S Rotate, Moving Base Reference Point. Rotates, WBa, WDHaaaaVbbbb

Programming Manual 3. Command Code Quick Reference

R	Rotate, Moving Base Reference Point. Rotates the
	printing of all subsequent images by 90 degrees coun-
	terclockwise each time it is used. Also moves the base
	reference point.
S	Font type. Specifies the 8W x 15H dot matrix font
	(including descenders).
Tabcc(data)	Store Custom Designed Characters. To create and
	store custom characters or images in the printer’s vola-
	tile memory. See Kab90cc to recall the character for
	printing.
	a	=	1 16 x 16 matrix
			2 24 x 24 matrix
	b	=	Specifies data stream format to follow
			B	Binary
			H	Hexadecimal
	cc	=	Memory location to store the character.
			Valid locations are 21 to 52 or “!” to “R” in hex
			values.
	(data) = Data to describe the character.
U	Font type. Specifies a 5W x 9L dot matrix font (inclu-
	ding descenders).
Vbbbb	Vertical Position. Specifies a field’s vertical location
	down the length of the label from the current base refe-
	rence point. Units of measurement are dots.
WBa	Font type. Specifies the 18W x 30L dot matrix font
	(including descenders).
	a	= 0	Disables auto-smoothing of font

1Enables auto-smoothing if expansion is greater than 3

WDHaaaaVbbbb

XccccYdddd Copy Image Area. To copy an image to another loca- tion of the label.

aaaa=	Horizontal position of the top left corner of
	image area
bbbb=	Vertical position of the top left corner of image
	area

cccc= Horizontal length of image area dddd= Vertical length of image area

SATO RISC Printers 125