SATO M8490S, M8460S CSa, DCxx...x, Eaaa, Faaaabcccc Ddee, FWaaHbbbb, FWaabbVccc Hdddd, FWccVddd

3. Command Code Quick Reference			Programming Manual
C	Repeat Label. Prints a duplicate of the last label prin-
	ted.
CSa	Print Speed Selection. Specifies a unique print speed
	in in./sec. through software for a particular label.
Dabbcccd	Bar Codes. Prints 1:2 ratio bar code. For UPC and
	EAN bar codes, this will add descender bars. For
	values a, bb, ccc and d see instructions for Babbcccd.
DCxx...x	Data Matrix. Print Data. Prints data using Data Matrix
	format specified in BX Data Format command.
	xx...x	= Data to be printed. Cannot exceed 500 cha-
		racters.
Eaaa	Line Feed. Provides the ability to print multiple lines of
	the same character size without specifying a new print
	position for each line.
	aaa	= Number of dots (1-999) between the bottom
		of the characters on one line to the top of the
		characters on thenext line.
Faaaabcccc
ddee	Sequential Numbering. Allows the printing of sequen-
	cing fields (text, bar codes) where all incrementing is
	done within the printer.
	aaaa	= Number of times to repeat the same data
		(0001-9999)
	b	= Plus or minus symbol (+ for increments; - for
		decrements)
	cccc	= Value of step for sequence (001-9999)
	dd	= No. of digits for sequential numbering (01-99,
		default = 8)
	ee	= No. of digits free from sequential numbering
		(01-99, default = 0)
FWaaHbbbb	Horizontal Line. Prints a horizontal line. Units of mea-
	surement are dots.
FWaabbVccc
Hdddd	Box. Prints a box. For values aa, bbbb, cc, and dddd,
	see instructions for horizontal and vertical lines. Units
	of measurement are dots.
FWccVddd	Vertical Line. Prints a vertical line. Units of measure-
	ment are dots.

122 SATO RISC Printers