SATO M8490S, XL400/410, M8460S, M-8400RV, M8485S, M8459S, CL408/412 Command Codes Programming Manual

2. Command Codes Programming Manual

Note:

1.UPC and EAN bar codes are not affected by the different types of narrow to wide ratios. Instead, the <ESC>D command adds descender bars to these codes where needed to meet UPC spec- ifications. The <ESC>BD command puts decender bars and human readable text below the symbol.

2.The Code 128, UCC 128, MSI, and Code 93 bar codes are not affected by the narrow to wide ratios.

3.The Codabar, Code 39, Industrial 2 of 5, and Matrix 2 of 5 bar codes are affected by the Character Pitch command. This com- mand must be placed before the Bar Code command.

4.Because of their unique characteristics, two-dimensional sym- bols are covered separately.

5.For UCC128, the FNC1 code is automatically inserted and the Mod 10 and Mod 103 check digits are automatically calculated.

6.For the MSI bar code, the check digit is not automatically calcu- lated.

26 SATO RISC Printers