SATO M8459S, XL400/410, M8460S, M8490S, M-8400RV, M8485S, CL408/412, CL608/612 manual Form Overlay, Store

Programming Manual2. Command Codes

	Form Overlay, Store
Command Structure:
<ESC>&
Example:	See above
Placement:	Must be preceded by all other data and placed just be-
	fore the Stop command (<ESC>Z)
Default:	None

Function:

To store a label image in the volatile form overlay memory. Only one label image may be stored in this memory area at a time.

Input:

<ESC>A

<ESC>H0001<ESC>V0125

<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE

<ESC>H0001<ESC>V0165<ESC>B103100*12345*

<ESC>&

<ESC>Z

Output:

There is no output from this command. It stores the label image in the overlay buffer.

Note:

1.Remember that this storage is volatile. Therefore, if the printer loses power, the overlay must be sent again.

2.The overlay is recalled using the <ESC>/ Form Overlay Recall command.

3.Form overlays do not have to be recompiled each time they are called to be printed and therefore may result in much faster print output.

SATO RISC Printers 53