SATO M8485S, XL400/410, M8460S, M8490S, M-8400RV, M8459S manual Memory Card Function Clear Card Memory

2. Command Codes Programming Manual

Memory Card Function

Clear Card Memory

Command Structure: <ESC>*a,bb

a:Memory card section to be cleared

G To clear SATO graphic files from memory card P To clear PCX graphic files

F To clear formats from the memory card

O To clear TrueType fonts

bb:Memory Card storage area to be cleared 01 to 99 for Graphics, PCX or Formats 00 to 09 for TrueType fonts

Example:	<ESC>*G,01
Placement:	This command should be sent to the printer immediately
	following the <ESC>CC Slot Select command.
Default:	None

Function:

To clear individual memory areas in the Memory Card.

Input:

<ESC>A

<ESC>CC1<ESC>*O,09

<ESC>Z

Output:

There is no printer output as a result of this command.

Note:

1.To clear everything in the memory card, use the <ESC>BJF Mem- ory Card Initialize command.

2.This command is ignored if there is no data to be cleared.

3.This command is ignored if a memory card is not installed in the printer.

100 SATO RISC Printers