SATO M8485S, XL400/410, M8460S, M8490S, M-8400RV, M8459S, CL408/412 Command Codes Programming Manual

2. Command Codes Programming Manual

Note:

1.It is recommended that all lines and boxes be specified in the nor- mal print direction.

2.The maximum allowable lengths are as follows:

	CL 408	CL 412	CL 608 (VA)	CL 612 (VA)
Horizontal	0 to 0832	0 to 1248	0 to 1216	0 to 1984
aaaa
Vertical	0001 to 1424	0001 to 2136	0001 to 1424	0001 to 2136
bbbb

	M8485S	M8490S	M8460S	M8459S
Horizontal	0 to 1248	0 to 1344	0 to 1216	0 to 0896
aaaa
Vertical	0001 to 1424	0001 to 2136	0001 to 1424	0001 to 2136
bbbb

	XL 400	XL 410	M8400RV
Horizontal	0 to 0800	0 to 1200	0 to 0832
aaaa
Vertical	0001 to 1920	0001 to 1920	0001 to 1920
bbbb

60 SATO RISC Printers