SATO XL400/410, M8460S, M8490S, M-8400RV, M8485S Characters, Custom-Designed, ESCKab90cc, ESCT1H3F

2. Command CodesProgramming Manual

Characters, Custom-Designed

Command Structure:
Store Command	<ESC>Tabcc
Recall command	<ESC>Kab90cc

a:Matrix size

1:16x16 matrix

2:24x24 matrix

b:Specifies the character encoding method for the data stream

H:Hexadecimal characters

B:Binary characters

cc:Memory location to store/recall the character. Valid memory locations are 21 to 52 (counting in Hex) or “!” to “R” in Binary

{data}	Data to describe the character
Example:	<ESC>T1H3F
	<ESC>K1H903F
Placement:	The Store command is typically sent in its own data st-
	ream to the printer, between the Start/Stop commands.
	The Recall command is sent in a secondary data st-
	ream to print the character,and follows any necessary
	position or size commands.
Default:	None

Function:

To allow for the creation, storage, and printing of custom characters, such as special fonts or logos. Up to 50 individual characters may be stored in the custom character volatile memory.

32 SATO RISC Printers