Hardware setup
Presentation
Relay outputs
Analog inputs 
Logic inputs
Addressing switches, SW1
PROFIBUS DP
RJ45 socket |
| Line termination switches, SW2 |
|
LEDs
Receipt
•Check that the card catalog number marked on the label is the same as that on the delivery note corresponding to the purchase order.
•Remove the option card from its packaging and check that it has not been damaged in transit.
Installing the card in the drive
DANGER
UNINTENDED EQUIPMENT OPERATION
•Do not plug or unplug the terminal board while drive is powered.
•Check the tightening of the fixing screw after any manipulation on the terminal board.
Failure to follow these instructions will result in death or serious injury.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Do not touch the terminal board before:
•removing power on the drive,
•removing any voltage on input and output terminals.
Failure to follow these instructions will result in death or serious injury.
8 | S1A10386 10/2009 |
