Error diagnostics via fieldbus | Schneider Electric DS301 instruction

7 Diagnostics and troubleshooting

IL•1F CANopen DS301

7.2Error diagnostics via fieldbus

7.2.1Message objects

A number of objects provide information on the operating and error state:

•Object Statusword (6041h)

Operating states, see product manual

•Object EMCY (80h+ Node-ID)

Error message from a device with fault state and error code, see chapter 3.4.2.5 "Emergency service"

•Object Error register (1001h)

Fault state

•Object Error code (603Fh)

Error code of the most recent error

•Devices use the special SDO error message ABORT to signal errors in exchanging messages by SDO.

7.2.2Messages on the device status

Synchronous and asynchronous errors are distinguished in the evalua- tion and handling of errors.

Synchronous errors The device signals a synchronous error directly as a response to a mes- sage that cannot be evaluated. Possible causes comprise transmission errors or invalid data. For a list of synchronous errors see chapter 7.3.1 "Error register".

Asynchronous errors Asynchronous errors are signaled by the monitoring units in the device as soon as a device fault occurs. An asynchronous error is signal via bit 3, "Fault", of the object statusword (6041h). In the case of errors that cause a an interruption of the movement, the device transmits an EMCY message.

Asynchronous errors are also reported via bits 5..7 of the object driveStat (2041h).

0198441113586, V2.01, 11.2008

76	Fieldbus interface

Image 76

Schneider Electric DS301 manual Error diagnostics via fieldbus, Message objects, Messages on the device status

Contents

IL1F CANopen DS301 Important information Table of Contents Table of Contents IL1F CANopen DS301 Object directory Table of Contents IL1F CANopen DS301 Writing conventions and symbols Writing conventions and symbols IL1F CANopen DS301 About this manual IntroductionCAN-Bus Operating modes and functions in fieldbus mode Fieldbus devices networked via can bus Documentation and literature references Can users and manufacturers organization Introduction IL1F CANopen DS301 Before you begin safety information Before you begin safety information IL1F CANopen DS301 Basics CANopen technologyCANopen description language Communication layers Objects Index hex Object groups Supported By the drive IL1F CANopen DS301 Basics CANopen profiles CANopen reference model Object dictionary Communication profileIndex Subindex Object Meaning Index range Object groups Supported Hex By the drive Communication objects Communication objects COB ID with function code and node address TPDO4 Communication relationships Master slave relationships Client-server relationship Overview Service data communicationSDO data exchange SDO message 11 SDO message, example Reading and writing data Message type Data length used Bytes 14 Reading a parameter value Message type Data length used Byte Bytes 15 Response with error message error response Process data communication PDO data exchange 16 PDO data exchange UINT32 Dynamic and static PDO mapping 18 Requesting a message with RTR = Receive PDO RPDO4 master slave Structure of RPDO4 State machine drivectrl Operating modes modeCtrl JOG @ Warning Transmit PDO TPDO4 product to master Structure of TPDO4 20 Structure of TPDO4 Handshake with Mode Toggle Bit Bit Name Description 22 Mode Toggle Handshake, short movement Master Slave Xend Basics IL1F CANopen DS301 Emergency service 23 Error message with the Emcy object Synchronization 25 Sync message 27 Cyclic and acyclic transmission Network management services NMT services for device control Initialization NMT service Transition MeaningPersistent data memory Command Specifier NMT service Transition NMT services for connection monitoringNode/Life guarding 31 Acknowledgement of the NMT slave 32 Node Guarding and Life Guarding with time intervals Installation Installation IL1F CANopen DS301 Commissioning Commissioning the device Address and baud rate Starting fieldbus modeCommissioning the fieldbus network Troubleshooting Error Error class Cause of error Troubleshooting Creating a new network SyCon CANopen configuration softwareSelecting the CANopen master Setting the bus parameters Selecting and inserting nodes Operation Overview Operation IL1F CANopen DS301 Using SDO commands Writing parametersTransmit data Receive data Reading a parameter Synchronous errorsIndex Sub Data Description Changing operating states with PDO4 Operating Name Power Description State StageBit no Value Meaning Triggering a Quick Stop Switching the power stage on and offExample Come to a standstill System is to resume opera Resetting faults Examples for the operating modes with PDO4 Operating mode Profile Position absolute positioning Operating mode Profile Position relative positioning Operating mode Profile Velocity Position setting Master --- Slave Operating mode Homing Error signaling via PDO4 Asynchronous errors Positioning running xerr=0 Operation IL1F CANopen DS301 Diagnostics and troubleshooting Fieldbus communication error diagnostics Message objects Error diagnostics via fieldbusMessages on the device status CANopen error messages Error registerError code table Bit Message Meaning SDO error message Abort Error code Meaning Specifications for the objects Object directoryObject code Meaning Coding Data type Value range Data length Index Subindex Designation Obj. code Data type Access Objects, overview Objects of the product Error registerDevice type Bit coding, subindex 00h 1008hManufacturer device name 100Ch Index 100D h Object name Life time factor Object code Index 1018 h Object name Identity Object Object code Data type PDO Communication parameter Bit assignment subindex 01h Bit 30 RTR bitBit coding, subindex 02h Bit Acces Value Meaning 1603h Receive PDO4 mapping Value description 1803h Transmit PDO4 communication parameter BitMeaning Subindex 03 h, inhibit time TPDO4 Meaning IL1F CANopen DS301 Object directory PDO4 mapping 1603h Glossary Units and conversion tables Temperature RotationTorque Moment of inertia Default value Factory setting Terms and Abbreviations Power amplifier See power stage Index Can Index IL1F CANopen DS301 IL1F CANopen DS301 Index NMT IL1F CANopen DS301 Index 102 Fieldbus interface