IL•1F CANopen DS301 | 5 Commissioning |
5 Commissioning
@ DANGER
UNINTENDED CONSEQUENCES OF EQUIPMENT OPERATION
When the system is started, the drives are usually out of the opera- tor's view and cannot be visually monitored.
•Only start the system if there are no persons in the hazardous area.
Failure to follow these instructions will result in death or serious injury.
@ WARNING
UNINTENDED OPERATION
•Do not write values to reserved parameters.
•Do not write values to parameters unless you fully understand the function. For more information see the product manual.
•Run initial tests without coupled loads.
•Verify that the system is free and ready for the movement before changing parameters.
•Verify the use of the bits with fieldbus communication: bit 0 is far right (least significant). Bit 15 is far left (most significant).
•Verify the use of the word sequence with fieldbus communication.
•Do not establish a fieldbus connection unless you have fully understood all communications principles.
Failure to follow these instructions can result in death, serious injury or equipment damage.
5.1Commissioning the device
For installation in the network, the device must first be properly installed (mechanically and electrically) and commissioned.
Commission the device as per product manual. This prepares the device for operation in the network.
0198441113586, V2.01, 11.2008
Fieldbus interface | 53 |
