OPERATION
■Auto Shut-Off (Sleep Mode)
The console will automatically shut off in approximately two minutes without use or input. There is no on/off switch.
■Information Mode
The computer enables you to switch between English or metric units by pressing and holding the UP and DOWN buttons simultaneously for three seconds. Use the UP or DOWN button to select ENGLISH or METRIC, and press ENTER to confirm. The computer will enter the Information mode. By following the displayed menu and prompts in the Information mode, you will be able to:
Select ENGLISH measurement units, which sets the computer for:
•Miles
•Miles/hour
•Pounds
•Inches
Or select METRIC measurement units, which sets the computer for:
•Kilometers
•Kilometers/hour
•Kilograms
•Centimeters
Press ENTER, which will display the software version.
Press ENTER again to exit the Information mode, and the computer will bring you to the “ENTER PROGRAM” mode.
■Grip Heart Rate
This Schwinn® elliptical trainer is equipped with grip heart rate sensors located on the handlebars. You must contact these sensors with both hands so that the computer can detect your pulse. The computer uses information detected by the grip heart rate sensors for many of the software features. Make sure you are griping the pods, and look for the flashing “heart” icon and pulse rate located on the lower right portion of the LCD display (to the left of the motion indicator), indicating that a pulse signal is being received. This is extremely important for the Heart Rate
26
