6.ASSEMBLING AND INSTALLATION
Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard.
Perform assembling as per this manual. Since this is a complex machine, erroneous assembling can cause an electric shock, machine damage and or not functioning as per specified performance.
When assembling, be sure to use plural persons. Depending on the assembly work, there are some cases in which working by one person alone can cause personal injury or parts damage.
Ensure that connectors are accurately connected. Incomplete connections can cause electric shock hazard.
Be careful so as not to damage wirings. Damaged wiring can cause electric shock and short circuit hazards.
In the case the cabinet is separated into the front and rear portions, do not push the upper rear part of the front cabinet. Failure to observe this causes the front cabinet to fall down towards the monitor side and result in accidents and injury to persons. When moving the front cabinet in the above case, be sure to push it from side directions and move it by 2 or more persons for safety.
This work should be performed by the Location's Maintenance Man or Serviceman. Performing work by
Provide sufficient space so that assembling can be performed. Performing work in places with narrow space or low ceiling may cause an accident and assembly work to be difficult.
When handling plastic parts, use care. Do not give a shock or apply excessive load to the fluorescent lamps and plastic parts. Failure to observe this can cause parts damage, resulting in injury due to fragments, cracks and broken pieces.
www.seuservice.com10
