8. PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE
STOP
IMPORTANT!
When moving the machine, be sure to unplug the power plug. Moving the machine with the plug as is inserted can damage the power cord and cause fire and electric shock hazards.
When moving the machine on the floor, retract the Adjusters and ensure that Casters make contact with the floor. During transportation, pay careful attention so that Casters do not tread power cords and earth wires. Damaging the power cords can cause electric shock and short circuit hazards.
When lifting the cabinet, be sure to hold the grip portions or bottom part. Lifting the cabinet by holding other portions can damage parts and installation portions due to the empty weight of the cabinet, and cause personal injury.
In the case the cabinet is separated into the front and rear portions, do not push the upper rear part of the front cabinet. Failure to observe this causes the front cabinet to fall down towards the monitor side and result in accidents and injury to persons. When moving the front cabinet in the above case, be sure to push it from side directions and move it by 2 or more persons for safety.
Do not insert the fork to places other than designated when using a Forklift to transport the machine.
Failure to observe this could cause falling down and injury resulting from falling down.
Do not push
When transporting the product in places with steps, disassemble into each unit before transporting. Inclining the product in an as is assembled condition or placing the cabinet in places with steps can damage the unit's joining portions.
To protect surface, do not directly apply a rope to the surfaces of product. Use protective materials to the places the rope is applied to.
In the case the cabinet is separated into the front and rear portions, do not push the upper rear part of the front cabinet.
FIG. 8 a
27www.seuservice.com
