REAR CABINET (Greasing to Seat Rail Portion)
Move the Seat to the rearmost portion and apply spray greasing to the portion shown at the right once every 3 months by using NOK KLUBER L60 or GREASE MATE SEGA PART No.
After greasing, move the Seat a few times forward and backward so as to allow the grease to be applied all over uniformly. Be sure to wipe grease which attaches to the surfaces of the PROTECT RUBBER on the Seat Rail, or any excess grease.
FIG. 16
CLEANING THE CABINET SURFACES
If the Cabinet is badly stained, use a cloth which is dipped in the chemical detergent liquid diluted with water and then squeezed dry. Do not use such solvents as alcohol, thinner, benzine, etc., or abrasives, bleaching agents and or chemical dustcloth as these can damage cabinet surface finish.
67www.seuservice.com
