Roll shaft | New Roll Paper |
|
Note that this Roll Paper holder will not be seen when setting the new Paper for the first time.
Head Up Lever | FIG. 7. 2 h |
|
8Insert the paper tip in to the Roll Paper insertion slot. Feed the Roll Paper tip through the exit slot straight by hand. At this time, if the Paper tip is in excess of the feeding point, the automatic feeding of Paper is performed and the Paper is cut after feeding about one page long.
9Push down the Head Up Lever.
The feeding point of the Roll
Paper tip.
FIG. 7. 2 i
Push down the Head Up Lever.
10Turn on power. The Printer starts automatic feeding of the paper (AUTO LOADING) and then cuts the paper automatically. If the Paper tip position is appropriate as per previous procedure, the automatic feeding's movement is slight and the paper cutting may not be done.
11Push the ASSY PRINTER into the point the PRINTER reaches the securing part in the innermost of the unit.
12Lock the Printer Door to secure.
www.seuservice.com24
