REPLACING THE VOLUME
1Turn the power off.
2Take out the 2 screws and remove the Potentiocover (FIG. 11. 1 c).
3Disconnect the connector of the Volume to be replaced.
4Remove the screw which secures the Potentiobase (FIG. 11. 1 b).
5Remove the Potentiobase together with the Volume as is attached. (FIG. 11. 1 c)
6Remove the Base and Gear to replace the Volume.
7Adjust the Volume as per the previous page after replacing.
TRUSS SCREW (2)
M4 X 8
POTENTIOCOVER
11 - 2 GREASING
FIG. 11. 1 c
POTENTIOBASE
STOP
IMPORTANT!
Be sure to use the designated grease. Using undesignated grease can cause parts damage.
Once every 3 months, apply greasing to the Spring and Gear mesh portion. For spray greasing, use GREASE MATE (PART No.
GREASING
FIG. 11. 2
www.seuservice.com40
