10.6-SPEED SHIFT

￿Before starting to work, ensure that the Power SW is OFF. Failure to observe this can cause electric shock or short circuit.

￿Use care so as not to damage wirings. Damaged wiring can cause electric shock or short circuit.

￿Do not touch undesignated places. Touching places not designated can cause electric shock or short circuit.

￿This work should be performed by the Location's Maintenance Man or Serviceman. Performing work by non-technical personnel can cause electric shock hazard.

￿When performing work such as parts replacement other than those specified in this manual, be sure to contact where you purchased the product from. Confirm the work procedures and obtain precautions from where you purchased the product from prior to performing work. Inappropriate parts replacement and/or installation with erroneous adjustment can cause an overload or the parts to come into contact, resulting in an electric shock, a short circuit, and a fire.

10 - 1 REMOVING THE SHIFT LEVER

1Turn off power.

2Take out 4 screws securing the EFFECT Switch.

3Take out 5 Truss screws which secure the Console Cover.

TRUSS SCREW (4)

M4 X 12

CONSOLE COVER

EFFECT SWITCH

TRUSS SCREW (5)

 

PHOTO 10. 1 a

M4 X 12,large washers used

 

www.seuservice.com36

Page 43
Image 43
Sega F355 owner manual Speed Shift, 10 1 Removing the Shift Lever