12.CLUTCH PEDAL
Before starting to work, ensure that the Power SW is OFF. Failure to observe this can cause electric shock or short circuit.
Use care so as not to damage wirings. Damaged wiring can cause electric shock or short circuit.
Do not touch undesignated places. Touching places not designated can cause electric shock or short circuit.
This work should be performed by the Location's Maintenance Man or Serviceman. Performing work by
When performing work such as parts replacement other than those specified in this manual, be sure to contact where you purchased the product from. Confirm the work procedures and obtain precautions from where you purchased the product from prior to performing work. Inappropriate parts replacement and/or installation with erroneous adjustment can cause an overload or the parts to come into contact, resulting in an electric shock, a short circuit, and a fire.
If the Clutch Pedal's operation is not satisfactory, the V.R. installation position adjustments or V.R. replacement is needed. Also, be sure to apply greasing to the V.R. Gear mesh portion and the 2 Springs once every 3 months.
12 - 1 REMOVING THE CRUTCH PEDAL
1Turn off power.
2Take out 4 Hexagon Bolts. At this time, support the Clutch Pedal as taking out the bolts can cause the Clutch Pedal to fall.
PHOTO 12. 1 a
HEXAGON BOLT (4)
M8 X 30,w/spring washer
41www.seuservice.com
