6Remove the Corner Plate. When it is hard to remove the Corner Plate, loosen the 5 screws which secure the Corner Light Lid.
CORNER LIGHT LID
SLIM LAMP
PHOTO15 e
CORNER PLATE
7Take out 2 screws which secure the Bracket of connector side of the Slim lamp.
8Disconnect the connector and replace the Slim lamp.
9Insert the edge of the replacing Slim lamp in to the holder.
10Pass the plastic made bush and spacer through the 2 screws which
secure the Bracket of the connector side. Install in a manner to put the installation portion between the bush and the spacer.
SPACER
CONNECTOR
TRUSS SCREW (2)
M4 X 12,flat washer used.
BUSH
FIG. 15 c
www.seuservice.com62
