For the purpose of static prevention, special coating is applied to the CRT face of this product. To protect the coating, pay attention to the following points. Damaging the coating film can cause electric shock to the customers.
Do not apply or rub with a hard item (a rod with pointed edge, pen, etc.) to or on the CRT surfaces.
Avoid applying stickers, seals, etc. on the CRT face.
Aluminum Foil
Do not remove aluminum foils from the CRT corners. Removing the aluminum foils can cause static prevention effects to be lowered.
14 - 2 CAUTIONS TO BE HEEDED WHEN CLEANING THE CRT SURFACES
Static preventive coating is applied to the CRT surfaces. When cleaning, pay attention to the following points. Peeling off of static preventive coat can cause electric shock.
Remove smears by using a dry, soft cloth (flannels, etc.). Do not use a coarse gauze, etc.
For smear removing solvent, alcohol (ethanol) is recommended. When using chemical detergent, be sure to follow instructions below:
•Dilute chemical detergent with water and dip a soft cloth in and then thoroughly wring it to wipe smears off.
•Do not use a chemical detergent containing an abradant, powder or bleaching agent.
•Do not use alkaline chemical detergents such as "glass cleaner" available on the market or solvents such as thinner, etc.
Do not rub or scratch the CRT face with hard items such as brushes, scrub brush, etc.
Clean the CRT surfaces once a week. When cleaning, pay attention to the above caution so that the antistatic coating will not come off.
51www.seuservice.com
