Sennheiser system manual Operating the components of the SDC 8000 system

Operating the components of the SDC 8000 system

￿ Press the MICRO key .

Pressing the MICRO key on your console will automatically turn off the microphone of the previous speaker (“first-in-first-out” principle). The red signal light ring and the “Microphone active” LED on your console light up permanently, indicating that you can now take the floor.

Note!

One delegate unit and the chairman unit can be simultaneously active.

3.In “Group 1” mode:

In this mode, the speaker limit is 1. ￿ Press the MICRO key .

If no other participant is currently speaking, you can take the floor immediately. The red signal light ring and the “Microphone active” LED on your console light up permanently, indicating that you can now take the floor.

If the speaker limit has been reached, you will join the waiting list and the green “Request to speak” LED on your console starts flashing. As soon as the active microphone is turned off, the microphone of the first participant from the request-to-speak list is turned on, and so on.

When it is your turn to speak, the red signal light ring and the “Microphone active” LED on your console light up permanently.

4.In “Group 2” mode:

In this mode, the speaker limit is 2. ￿ Press the MICRO key .

If the speaker limit has not yet been reached, you can take the floor immediately. The red signal light ring and the “Microphone active” LED on your console light up permanently, indicating that you can now take the floor.

If the speaker limit has been reached, you will join the waiting list and the green “Request to speak” LED on your console starts flashing. As soon as one of the active microphones is turned off, the microphone of the first participant from the request-to-speak list is turned on, and so

on.
When it is your turn to speak, the red signal light ring	and the

“Microphone active” LED on your console light up permanently.

5.In “Group 3” mode:

In this mode, the speaker limit is 3.

26