Configuring the SDC 8000 system
Booth Configuration 2
Booth Configuration
3
1.Booth Configuration
Choose
Choose the number of the booth whose main target language corresponds to the language you want to configure for the
Example:
Let us assume that there are three interpreter booth: y Booth 1 for the target language English
y Booth 2 for the target language French y Booth 3 for the target language German
In order to set the
Enabling the auto-relay interpretation function (Auto-floor)
If the original floor language is a language of which all interpreters have a complete understanding and from which they work, you do not have to enable this function. In this case, all interpreters interpret the original floor language into their respective target languages. These interpretations are then fed to the corresponding interpretation channels.
If the original floor language is not a language of which all interpreters have a complete understanding and from which they work, you can enable the
To enable the
Attention!
The interpreter who delivers the relay interpretation has to choose the
From the central unit’s operating menu, choose “Interpretation”, “Configuration” and “Select Booth” one after the other.
The current booth number is shown on the display.
Choose the number of the booth from which the relay interpretation is to be delivered and press the ENTER key.
Choose
Choose “Yes” to enable the
The relay interpretation is automatically “relayed” to the floor channel
of all other interpreter consoles and the AUTOFLOOR LED on these interpreter consoles lights up, indicating that the
89
