Configuring the audio inputs and outputs | Sennheiser SDC 8000

Configuring the SDC 8000 system

Aux-In/Out

1 Aux Out 1 & 2

Aux Out 3

1 Volume

Aux Out 3

Volume = 00

Press ENTER to Save

Configuring the audio inputs and outputs

You can connect external audio sources such as a CD player, a microphone with preamplifier etc. to the central unit’s audio inputs.

Instead of connecting an external audio source, you can connect the audio output of a conference system installed in a separate room to carry out a remote conference.

Via the audio outputs, you can connect e.g. a recording unit.

Via the “Aux-In/Out” menu, you can configure the central unit’s audio inputs and outputs for the connected equipment.

Choosing the audio inputs and outputs

The central unit features five audio outputs.

The output signal of the floor channel is always available at the two outputs AUX OUT 1 (XLR-3M audio output ) and AUX OUT 2 (pin 1 and 6 of the 9-pole sub-D socket ).

The outputs AUX OUT 3 - 4 - 5 are available at the 9-pole sub-D socket (for the pin assignment of this socket, please refer to page 51).

The two inputs AUX IN 1 and AUX IN 2 are available at the two XLR-3F sockets and .

To choose the audio output or input to be configured:

From the central unit’s operating menu, choose “Aux-In/Out”.

Then choose between the following inputs and outputs:

y Aux Out 1 & 2 y Aux Out 3

y Aux Out 4 y Aux Out 5 y Aux In 1 y Aux In 2

Press the ENTER key to active the menu item.

Adjusting the volume of the audio outputs

To set the volume of the output signal available at one of the audio outputs:

From the central unit’s operating menu, choose “Aux-In/Out”.

Choose the desired audio output.

Choose “Volume”.

The current volume is shown on the display.

Adjust the volume and press the ENTER key to save your setting.

94

Image 94

Sennheiser SDC 8000 system manual Configuring the audio inputs and outputs, Choosing the audio inputs and outputs

Contents

SDC Thank you for choosing Sennheiser Contents Via a PA system Configuring the interpretation system 100 Appendix a Safety information SDC 8000 the digital conference and interpretation system Overview of the components SDC 8000 system Conference consoles $!# Technology used Components of the SDC 8000 system in detail All consoles featureConsoles Interpreter console features SDC 8000 D conference unit SDC 8000 C chairman unit SDC 8000 DC conference unit SDC 8000 CC chairman unit SDC 8000 DV conference unit Vote LED SDC 8000 CV chairman unit SDC 8000 ID interpreter console Autofloor LED SDC 8000 CU central unit SDC 8000 AO analog output unit optional System cables Operating the delegate units Direct Access modeOperating the components SDC 8000 system Taking the floor / Making a request to speak Operating the components of the SDC 8000 system On your console go off With Req. No clear mode With request modeTurning off the microphone / Cancelling a request to speak Selecting an interpretation channel Voting Operating the chairman unit Using the chip card slot of a conference consoleOperating the VIP units Turning all active conference consoles off priority Starting a voting session Assigning a participant the speaking right Request Configuring the B-channel of an interpreter console Operating the interpreter consoles Using the interpreter console Operating the central unit Switching between the A-channel and the B-channelAdjusting the volume of the consoles’ built-in loudspeakers Muting the microphone of the interpreter console Menu operating controls F1, F2 and F3 menu keysOperating control Menu level Working with the central unit’s operating menu Interconnecting up to 10 central units Interconnecting the conference/interpreter consolesConnecting cable strings to a central unit Structuring the SDC 8000 system Expansion stage 1 one central unit with up to 15 consoles Expansion stage 2 one central unit with up to 90 consoles Determining maximum cable lengths Structuring an interpretation system Calculating the voltage drop on the system cables Mode between booths Override Selectable modes between or within interpreter boothsMode between booths Mixed Mode between booths Toggle Override Auto-floor function Mode in booths MixedMode in booths Override Example AUTO-FLOOR Using external equipment Connecting external audio sources Structuring the SDC 8000 system Setting up the SDC 8000 system Preparing the SDC 8000 system components for set up Connecting a cable string to the central unit Interconnecting the SDC 8000 system componentsInterconnecting the consoles Interconnecting several central units Connecting additional equipment Turning the central units on and off Carrying out remote conferences Connecting PA systems, recording units, etc Pin assignment of the 9-pole sub-D socket AUX OUT Daisy-chaining SDC 8000 AO analog output units Connecting a PC to the central unit Start display Configuring the SDC 8000 systemIntroduction to the central unit’s operating menu Six main menus Enter Exit Submenus of the Conference menu part 1 Submenus of the Conference menu part 2 Submenus of the Conference menu part 3 Submenus of the Conference menu part 4 Submenus of the Conference menu part 5 Submenus of the Conference menu part 6 Submenus of the Interpretation menu part 1 Submenus of the Interpretation menu part 2 Submenus of the Interpretation menu part 3 Submenus of the Interpretation menu part 4 Submenus of the Interpretation menu part 5 Submenus of the Aux-In/Out menu part 1 Enter Submenus of the Aux-In/Out menu part 2 Submenus of the Aux-In/Out menu part 3 Submenus of the Aux-In/Out menu part 4 Submenus of the Aux-In/Out menu part 5 Submenus of the Aux-In/Out menu part 6 Submenus of the System menu part 1 Submenus of the System menu part 2 Submenus of the Language and the License menu part 1 Turning on the central unit for the first time Settingthe volume of theconsoles’ built-inloudspeakersConfiguring the conference system Automatically initializing all conference consoles Manually initializing all conference consoles Reserving a microphone number Selecting a conference mode Setting the speaker limit Adjusting the audio settings for the consoles’ microphones Resetting the conference system Testing the consoles’ built-in loudspeakers Testing the consoles’ microphones Configuring the display of the voting options Configuring the interpretation systemWorking with the interpreter configuration Creating a new interpreter configuration Modifying the currently active interpreter configuration Loading a previously saved interpreter configuration Setting the max. number of interpreter consoles per booth Setting the max. number of interpreter booths/languagesOptions Configuring the operating mode between booths Configuring the operating mode within a booth Configuring the main target language A-channel of a booth Configuring the language options for the interpreter boothsConfiguring the second target language B-channel of a booth Enabling the auto-relay interpretation function Auto-floor ENG To transmit the selected booth number to Adding interpreter consoles to an existing configuration Resetting the interpretation system Adjusting the volume of the audio outputs Configuring the audio inputs and outputsChoosing the audio inputs and outputs Assigning a channel to an audio output Configuring the audio outputs for remote conferencingTurning the audio inputs or outputs on and off Adjusting the input sensitivity of an audio input Adjusting the input level of an audio inputConfiguring the outputs of the SDC 8000 analog output unit OUT Checking the communication within a cable string Configuring connected additional componentsMaking a system diagnosis Camera control Configuring an ambient sound console Software, language and license Choosing the language of the central unit’s operating menu Displaying the central unit’s serial number Replacing a fuse If problems occurMaintenance and care Conference/interpreter console does not work Accessories SDC 8000 D SpecificationsSDC 8000 C SDC 8000 DC SDC 8000 CC SDC 8000 DV SDC 8000 CV SDC 8000 ID 108 SDC 8000 AO analog output unit RJ 45 cable Syntax of the commands Appendix a Camera control protocol Commands Notation of the general syntax Commands Appendix B Control panel protocol 113 Appendix C Repeater for the SDC 8000 system 114 115 Approval