Operating the components of the SDC 8000 system
>Lautstaerke =
P1 P2 P3 P4 P5 P6
The interpreters can individually adjust both the volume of their consoles’
The F1, F2 and F3 menu keys
The F1 and F3 menu keys serve to lock the central unit. The F2 menu key has no function with the current unit.
To lock the central unit:
Make sure that the start display appears as shown on the left. If the start display does not appear, press the EXIT key repeatedly until the start display appears.
Simultaneously press the F1 and F2 menu keys | and keeps them | |
pressed for three seconds. |
| |
The “key” symbol ( | ) appears in the lower right corner of the |
display. The operating menu of the central unit is locked and you cannot change the settings of your conference.
To unlock the central unit: |
|
|
Simultaneously press the F1 and F2 menu keys | and keeps them | |
pressed for three seconds. |
| |
The “key” symbol ( | ) disappears from the lower right corner of the |
display. The operating menu of the central unit can be accessed at any time by pressing the ENTER key (see “Working with the central unit’s operating menu” on page 37), and you can change all settings of your conference.
The menu operating controls
The jog wheel and the ENTER and EXIT keys on the central unit allow you to navigate through the central unit’s operating menu, to choose settings and to enter and change values.
Operating control | Menu level | To | |
|
|
| |
| main menu | choose a menu item | |
|
|
| |
Jog wheel |
| choose a menu item | |
submenu | or | ||
| |||
|
| choose the desired setting | |
|
|
| |
| main menu | activate a selected menu item | |
ENTER key | or | ||
and | save settings and return to the | ||
| submenu | ||
| previous menu level | ||
|
| ||
|
|
| |
| main menu | exit a menu item without saving the | |
EXIT key | and | settings and return to the previous | |
| submenu | menu level | |
|
|
|
For a complete overview of all menus of the central unit, see “Introduction to the central unit’s operating menu” on page 54 to 75.
36