Operating the components of the SDC 8000 system

￿ Press the MICRO key .

If the speaker limit has not yet been reached, you can take the floor immediately. The red signal light ring and the “Microphone active” LED on your console light up permanently, indicating that you can now take the floor.

If the speaker limit has been reached, you will join the waiting list and the green “Request to speak” LED on your console starts flashing. As soon as one of the active microphones is turned off, the microphone of the first participant from the request-to-speak list is turned on, and so

on.

 

When it is your turn to speak, the red signal light ring

and the

“Microphone active” LED on your console light up permanently.

6.In “Group 4” mode:

n this mode, the speaker limit is 4.

￿ Press the MICRO key .

If the speaker limit has not yet been reached, you can take the floor immediately. The red signal light ring and the “Microphone active” LED on your console light up permanently, indicating that you can now take the floor.

If the speaker limit has been reached, you will join the waiting list and the green “Request to speak” LED on your console starts flashing. As soon as one of the active microphones is turned off, the microphone of the first participant from the request-to-speak list is turned on, and so

on.

 

When it is your turn to speak, the red signal light ring

and the

“Microphone active” LED on your console light up permanently.

7.In “No request” mode:

For this mode to function, the SDC 8000 system must be PC controlled.

In “No request” mode, you have to “apply” for a comment and wait until the conference manager turns on your microphone. The conference manager has total control of the microphones.

Note!

You cannot “apply” for a comment by pressing the MICRO key .

￿Signal your intention to take the floor e.g. by raising your hand or giving another sign.

The conference manager can either assign you the “speaking right” by turning on your microphone or ignore your request to speak.

When the conference manager turns on you microphone, the red signal light ring and the “Microphone active” LED on your console light up permanently. When the conference manager withdraws the

“speaking right” from

you, the red signal light ring

and the

“Microphone active” LED

on your console go off.

 

27

Page 27
Image 27
Sennheiser SDC 8000 system manual On your console go off