Sharp AR-C250 Information key p, Custom Settings key, Sided Copy key, Output key, Exposure key p

PART NAMES AND FUNCTIONS

Touch Panel (Basic screen)

SPECIAL

MODES

2-SIDED

COPY

OUTPUT

READY TO COPY.

AUTO

EXPOSURE

ORIGINAL 81211

	812	11R
1.812	11
2.11 17
3.812	14

AUTO 8/2 11	100%
1
PAPER SELECT		COPY RATIO

INFORMATION

CUSTOM

SETTINGS

INFORMATION key (p. 1-7)

Press for operation guidance on use of various features of this copier.

Press for guidance when a misfeed occurs, when adding toner, or when used toner must be disposed of.

CUSTOM SETTINGS key

Press to set key operator programs or adjust the contrast of the touch panel.

2-SIDED COPY key

Press to select the 1-sided to 1-sided, 1-sided to 2-sided*, 2-sided to 2-sided* or 2-sided to 1-sided* copy mode.

*To select the 1-sided to 2-sided or 2-sided to 2-sided copy mode, an optional duplex module (AR-DU2) must be installed. To select the 2-sided to 1-sided or 2-sided to 2-sided copy mode, an optional RADF must be installed.

OUTPUT key

Press to select the sorter mode when an optional staple sorter (AR-SS2) is installed.

EXPOSURE display

Indicates the selected exposure mode.

EXPOSURE key (p. 2-16)

Press to select the exposure mode: AUTO or MANUAL and TEXT/PRTD. PHOTO, TEXT/ PHOTO, TEXT, PHOTO, PRINTED PHOTO or MAP.

PAPER SELECT display

Displays the selected paper size. When “AUTO” is displayed, paper size matching the original and copy ratio will be automatically selected.

PAPER SELECT key

Press to select the desired paper tray.

COPY RATIO display

Displays the copy ratios for reductions or enlargements.

COPY RATIO key

Press to select a reduction or enlargement copy

ratio or select the automatic copy ratio selection			6CHAPTER
mode.
Initial settings
The copier assumes the initial settings when it is			Partnames	GENERAL
● Copy ratio: 100%
turned on, when the CLEAR ALL ( CA ) key is pressed,
and approximately 1 minute after the last copy is
made in any mode.			andfunctions	INFORMATION
● Automatic exposure, text/photo mode
● Copy quantity: 0
● All special copier modes are set to off.
● Tray select: Paper tray 1.
Optional large capacity tray will be selected when
installed.
★ KEY OPERATOR	Initial settings	can be

programmed as desired. The auto clear time can also be changed. See pages 21 and 25 of the KEY OPERATOR’S GUIDE.

6-5