Sharp AR-C250 Covers, Press the 2-SIDED Copy key and select the desired, Duplex selection window

COVERS

CHAPTER3 SPECIAL FUNCTIONS Covers

	The COVERS mode is used to place covers on the front, back, or both
	the front and back of multipage documents.
	● To use the COVERS mode, an optional RADF must be installed.
	● Front cover sheets can be copied on, but only on the front side even
	in the 1-sided to 2-sided and 2-sided to 2-sided copy modes.
	The back side of the original designated as the cover will not be
Covers	copied.
	● Back cover sheets cannot be copied on, either on the front side or on
	the back side.
	● Cover sheets must be fed from the bypass tray and must be the same
	size as the copy paper being used to copy the document.
	● When the COVERS mode is selected, the stream feeding mode of
	the RADF will always be off.
	1 Place the originals in the optional document feeder tray.

			Press the 2-SIDED COPY key and select the desired
		2 duplex mode if needed. Press the “OK” key to close the
2-SIDED			duplex selection window.
COPY			● To copy in the 1-sided to 2-sided or 2-sided to 2-sided copy
			mode, an optional duplex module (AR-DU2) must be installed.
OUTPUT
	AUTO
		3	Press the SPECIAL MODES key.
SPECIAL READY TO			● The SPECIAL MODES screen will appear.
MODES

	2-SIDED
	COPY	4	Press the “COVERS” key on the touch panel.
			● The setting screen for COVERS will appear.
READY TO COPY.				LOAD COVER STOCK INTO BYPASS-TRAY.
SPECIAL MODES		OK				OK
MARGIN SHIFT	ERASE	DUAL PAGE		COVERS	CANCEL	OK
		COPY
					PRINT ON FRONT COVER?
CENTERING	TRANSPARENCY INSERTS
				FRONT
	COLOR				YES
COVERS		IMAGE EDIT
	ADJUSTMENTS			BACK
					NO
AUTO	1	100%
	AUTO 8/2 11			FRONT+BACK
EXPOSURE	PAPER SELECT	COPY RATIO

3-14