Sharp AR-C250 operation manual Staple print, Printed output will be stapled

FINISHER (AR-FN4)

Staple print* (*In the PRINT mode only)

The staple print mode can be selected for stapling printed sets in the size of 5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14" and 11" x 17".

NOTE:

In the COPIER mode, which delivers the paper face up, this function is not available.

DATA ON LINE

PRINT

COPY

Check the operation panel to confirm that the ONLINE

1 indicator is lit. If not lit, press the “PRINT” key to enter the print mode and then press the ONLINE key on the touch panel.

●An optional printer connection kit (AR-PX2) and an optional printer controller (AR-PE1) are needed for the printing from computer.

READY TO PRINT. 2

81211R

1.812	11
2.11 17
3.812	14

ONLINE	PAPER SELECT
OFFLINE

3

Check the paper tray(s) to ensure that the desired paper is loaded.

●The maximum number of sheets for stapling is 20 for paper in the size of 5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", or 8-1/2" x 14" paper and 15 for 11" x 17" paper. If the maximum is exceeded, the sheets will not be stapled.

●Ensure that no paper remains in the output tray. Stapling will not be done if paper remains at the start of the print job.

Make all print selections by the printer driver at your computer and give the print command.

●Refer to the documentation for the computer and/or the application software for help on issuing the necessary commands.

OPTIONAL EQUIPMENT

Finisher (AR-FN4)

The printed output will be stapled.

4 ● The printed sets will be delivered face down with one staple in their top left edge.

CHAPTER7

7-21