Manuals / Sharp / Computer Equipment / All in One Printer

Sharp AR-C250 operation manual Misfeed removal, Copier will stop when a misfeed occurs

Models: AR-C250

1 161

Download 161 pages 25.58 Kb

Page 127

20-BIN STAPLE SORTER (AR-SS2)

Misfeed removal

MISFEED HAS OCCURRED.

The copier will stop when a misfeed occurs.

The message “MISFEED HAS OCCURRED. CLEAR INDICATED AREA. PRESS FOR RECOVERY INSTRUCTIONS.” will appear with a display of paper misfeed locations. Press the INFORMATION key for more detailed information as necessary.

CLEAR	INDICATED AREA.
PRESS	FOR RECOVERY INSTRUCTIONS.

1

2

Push the sorter release button and slide the sorter carefully along the guides away from the copier.

Remove the misfed paper from the sorter or from the exit area of the copier.

OPTIONAL EQUIPMENT 20-bin staple sorter (AR-SS2)

Slide the sorter back toward the copier and latch it into

3 place.

●Confirm that the misfeed display is cleared.

●If the message indicating a misfeed is still displayed, check the inside of the copier and remove any remaining misfed paper.

CHAPTER7

7-13

Image 127

Sharp AR-C250 operation manual Misfeed removal, Copier will stop when a misfeed occurs

Contents

AR-C250 For Your Records Easily accessibleColor Copy Samples Color Copying with Special FeaturesNeg./Pos. Reverse See Multi-page Enlargement See Photo Adjustments for Color CopyingRGB Adjust See Sharpness See Brightness/intensity/contrast See Color Balance Contents Introduction Using this ManualChapter How to use the touch panelInstallation Requirements Getting Started Cautions Safety Precautions Become possible Power on and OFFPreheat mode Power on and OFFPower save modes Sleep modeInformation Function Press the Information key in the standby modeScreen for the information categories will appear How to use the touch panel Using the Touch PanelSelection of function Function setting icons Using the Touch PanelPage Special Papers manual feed Making CopiesCopy Start key is pressed Auditing AccountsMaking Copies Copying from Sided copies of 1-sided originalsClose the document cover Use the 10-key pad to enter the desired number CopiesSided copies from 1-sided originals Copying from the Document GlassPress the Color Copy Start key or Black Copy the reminder of the originals in reverse order Number will be changed to 1 when a Start key is pressedCopy the originals in reverse order Stream feeding mode Using the RadfAdjust the original guides to the size of the originals Using the RadfSet the originals face up in the document feeder tray Auto Sided copies from 2-sided originals Adjust the original guides to the size of the originalsOriginal 2-sided Copies 1-sided Automatic selection REDUCTION/ENLARGEMENT/ZOOMManual selection REDUCTION/ENLARGEMENT/ZOOMClear Special Papers manual feed Two-sided copying with bypass tray Automatic Exposure AdjustmentsOriginal image type Printed PHOTO, PHOTO, or MAP depending on the original Exposure AdjustmentsPress the Exposure key on the touch panel Press the STORE/DELETE key on the touch panel JOB MemoryStoring a job program Press the Program keyDeleting a stored job program JOB MemoryRecalling a job program Interrupting a Copy RUN Special Functions Following screen will appear XY ZoomPress the XY Zoom key Press the Copy Ratio key on the touch panelPress the Y key XY ZoomCopy ratio in the vertical Y direction will be highlighted Press the Special Modes key Margin ShiftSpecial Modes screen will appear Select the shift direction Select the desired shift amounts usingMargin Shift Press the Margin Shift key on the touch panelPress the Erase key on the touch panel Setting screen for Erase will appearErase Edge + center eraseHighlighted Select the desired erase modeErase on the touch panel. The selected erase mode will be EraseDual page Copying Information 4 Press the OK key Dual page CopyingEnsure that the desired tray is selected Bottom direction CenteringPress the Centering key on the touch panel CenteringCentering key will be highlighted Press the Transparency Inserts key on the touch PanelTransparency Inserts key will be highlighted Key or Black Copy Start key Transparency Film with Insert SheetsInfor 4 Press the OK key Load transparency film into the bypass trayPress the 2-SIDED Copy key and select the desired CoversDuplex selection window Press the upper OK key Select cover placementCovers NotColor Adjustments menu will appear Color AdjustmentsKey to weaken the color Color AdjustmentsPress the RGB Adjust key on the touch panel Select a color to be adjustedPress the Sharpness key on the touch panel Setting screen for Sharpness will appearPress the upper OK key.SPECIALFUNCTIONS Coloradjustments Press the Suppress Background key on the touch Setting screen for Suppress Background will appearUse the and + keys to select the desired background Suppression levelLevel Brightness /INTENSITY /CONTRAST Select BRIGHTNESS, Intensity or Contrast on Select the desired item to be adjustedUse the and + keys to adjust the level Selected itemPress the Image Edit key on the touch panel Image Editing FunctionsImage Edit menu will appear Selected color key will be highlighted Image Editing FunctionsPress the Single Color key on the touch panel Select the desired colorRelation to the NEG./POS. Reverse Press the Image Edit key on the touch panelPress the NEG./POS. Reverse key on the touch Mode, the black and white areas will be reversedReverse C D Mirror Image key will be highlighted Press the Mirror Image key on the touch panelOptional document feeder cannot be used with this function Place the original on the document glassSelect the copy paper size depending on the original size Setting screen for Photo Repeat will appearPress the Photo Repeat key on the touch panel Select the desired repeat type11 x 17 FULL-BLEED To 100% when this function is selectedOriginal will be copied onto 12 x 18 size copy paper 11 x 17 FULL-BLEED key will be highlighted Press the 11 x 17 FULL-BLEED key on the touch panelPanel Setting screen for MULTI-PAGE Enlargement will appearPress the MULTI-PAGE Enlargement key on Touch panel Select the desired enlargement sizeSelect the original size Cancel OK Original Size & OrientationEither one or both can be set Setting screen for Image Edit selections will appearAdjust the original size on the Original Size tab Press the Auto Image key on the touch panel Press the upper OK key on the touch panelRefer to page 2-11 for the Auto Image function Types and sizes of copy paper SuppliesFor best results, use only Sharp recommended paper PaperTypes and sizes of copy paper Loading copy paperTray holds 500 sheets of 20 lb. bond paper PaperLoading paper in the paper trays Push the paper tray firmly back into the copierLoad copy paper into the tray Changing the copy paper size in the trayPlace the paper size card in the front of the paper tray Open the front cover Adding TonerLeft example shows the toner hopper of black toner Adding TonerIt will take about 40 seconds for the cartridge to empty Supplies Adding toner Push once on the door to unlatch and open it Used Toner DisposalDisengage and remove the container from the copier Open the toner collecting container coverStore copy paper in the wrapper and lying flat Storage of SuppliesProper storage Store the supplies in a location that isPage Copier TROUBLE? Misfeed Removal When a misfeed occurs, the copier will stopMisfeed in the optional Radf Open the exit roller cover and gently pull the original out Misfeed RemovalMisfeed in the bypass tray Open the feeding roller cover and pull the original gentlyDo not pull out the paper transport in this step Turn the transport lever to the leftIf the paper cannot be seen from the side, pull out Misfeed in the paper traysClose the front cover Open the right side coversClose the paper tray and the side covers Misfeed in the transport area, exit area and fusing areaOpen the front cover Turn the transport lever to the left Check to see if any paper is misfed in the exit areaGently close the upper right side cover Remove the misfed paper Misfeed in the optional duplex module Slide the paper guide if needed Push the duplex module back into the copierWhen the message Ready to COPY. Maintenance Required Maintenance RequiredToner Collecting Container of Transfer Unit Troubleshooting Self-diagnostic function TroubleshootingExample General Information Part Names and Functions Part Names and Functions LCD touch panel Interrupt key and indicator pColor Copy Start key and indicator Black Copy Start key and indicatorSided Copy key Custom Settings keyInitial settings Information key pDocument glass and document cover User MaintenanceContrast Contrast of the touch panel can be adjusted as belowCopier SpecificationsReversing Automatic Document Feeder optional SpecificationsDuplex Module optional Page Optional Equipment Staple cartridge replacementSystem Configuration Part Names BIN Staple Sorter AR-SS2BIN Staple Sorter AR-SS2 Using the staple sorterSorter Capacity Staple sort Using the document glassUp to 20 sets can be made Using the optional RadfManual stapling Press the manual staple key when it lights upSet of copies will be stapled Remove the empty staple cartridge from inside Staple box Staple cartridge replacementRemove the rear paper and tape from the cartridge Return the lever to its original position Staple jam removalBIN Staple Sorter AR-SS2 Misfeed removal Copier will stop when a misfeed occursSlide the sorter back toward the copier and latch it into 11 x 12 x SpecificationsPaper Weight 13 ~ 28 lbs 17 ~ 28 lbs 2 xLarge Capacity Tray AR-LC2 Paper size 2 x Paper weight 15 lbs. to 28 lbsLoad the paper onto the feed table When the button lamp goes out, pull the paper tray outLarge Capacity Tray AR-LC2 Fan the copy paperRemove any misfed paper from the copier and the large Capacity trayBe sure not to tear the misfed paper during removal Remove the misfed paper Gently push the tray back into place Finisher AR-FN4 Offset stack Offset modeNON Offset mode Finisher AR-FN4Printed output will be stapled Staple printReplace the staple as follows When the staple cartridge is empty, the message SlideOptionalequipment Staple jam removal FN4 Misfeed removal Finisher AR-FN4 Page Offset stack Staple print Staple cartridge replacement Remove the rear paper and tape from the cartridge Staple jam removal FN4 Misfeed removal Finisher AR-FN4 Page Staple print Optional EQUIPMENT7 Optionalequipment Staple jam removal Finisher AR-FN4 Misfeed removal Finisher AR-FN4 Page Page Sharp Corporation