Sharp AR-C250 operation manual Remove the rear paper and tape from the cartridge

				FINISHER (AR-FN4)
5		Remove the rear paper and tape from the cartridge.
		● Pull them straight. If they are pulled obliquely, the tape may be
			torn.
		Insert the staple box into the stapler until it clicks in
	6 place.
7		Push the finisher toward the copier and latch it in place.
		● If the stapler does not work properly after cartridge installation,
			it may have a jammed staple in it. See next page.
		● Staples for the finisher are available from your Sharp dealer.
			CAUTION
		Use caution while latching the finisher into place.				OPTIONALEQUIPMENT
					Finisher(AR-FN4)
		To prevent pinching your fingers, do not place your hand or fingers
		on the release lever while moving the finisher toward the copier.
					CHAPTER7

7-23