Erase, Select the desired erase mode, Highlighted | Sharp AR-C250

ERASE

			OK	Select the desired erase mode.
			OK	4 ● Select “EDGE ERASE”, “CENTER ERASE” or “EDGE+CENTER
	ERASE	CANCEL	OK	4 ● Select “EDGE ERASE”, “CENTER ERASE” or “EDGE+CENTER
	ERASE	CANCEL	OK	ERASE” on the touch panel. The selected erase mode will be
				ERASE” on the touch panel. The selected erase mode will be
			(0~1)	highlighted.
	EDGE ERASE		1 inch
	EDGE ERASE
	CENTER ERASE
	EDGE+CENTER
	ERASE

		OK
ERASE	CANCEL	OK
EDGE ERASE		1/2 (0~1)inch
EDGE ERASE
CENTER ERASE
EDGE+CENTER
ERASE

INFORMATION

		OK
	CANCEL	OK	CUSTOM
	CANCEL	OK	SETTINGS
			SETTINGS

1/2 (0~1)inch

3 INTERRUPT

6

CLEAR CA

ALL

9

PROGRAM C

P CLEAR

Adjust the amount of edge erase and/or center erase if

5 needed.

●The amount can be adjusted between 0" and 1" in 1/8" increments.

6 Press the upper “OK” key on the touch panel.

Make all other desired copier selections and press the

7 COLOR COPY START ( ) key or BLACK COPY START () key.

●To cancel the ERASE function, select the ERASE function again and press the “CANCEL” key.

CHAPTER3 SPECIAL FUNCTIONS Erase

3-7

Image 49

Sharp AR-C250 Select the desired erase mode, Erase on the touch panel. The selected erase mode will be, Highlighted

Contents

AR-C250 For Your Records Easily accessible Color Copy Samples Color Copying with Special Features Neg./Pos. Reverse See Multi-page Enlargement See Photo Adjustments for Color Copying RGB Adjust See Sharpness See Brightness/intensity/contrast See Color Balance Contents Introduction Using this Manual Chapter How to use the touch panel Installation Requirements Getting Started Cautions Safety Precautions Become possible Power on and OFF Power save modes Power on and OFFSleep mode Preheat mode Information Function Press the Information key in the standby modeScreen for the information categories will appear How to use the touch panel Using the Touch PanelSelection of function Function setting icons Using the Touch PanelPage Special Papers manual feed Making Copies Copy Start key is pressed Auditing Accounts Close the document cover Sided copies of 1-sided originalsUse the 10-key pad to enter the desired number Copies Making Copies Copying from Sided copies from 1-sided originals Copying from the Document GlassPress the Color Copy Start key or Black Copy the reminder of the originals in reverse order Number will be changed to 1 when a Start key is pressedCopy the originals in reverse order Stream feeding mode Using the Radf Adjust the original guides to the size of the originals Using the RadfSet the originals face up in the document feeder tray Auto Sided copies from 2-sided originals Adjust the original guides to the size of the originals Original 2-sided Copies 1-sided Automatic selection REDUCTION/ENLARGEMENT/ZOOM Manual selection REDUCTION/ENLARGEMENT/ZOOM Clear Special Papers manual feed Two-sided copying with bypass tray Automatic Exposure AdjustmentsOriginal image type Printed PHOTO, PHOTO, or MAP depending on the original Exposure AdjustmentsPress the Exposure key on the touch panel Storing a job program JOB MemoryPress the Program key Press the STORE/DELETE key on the touch panel Deleting a stored job program JOB MemoryRecalling a job program Interrupting a Copy RUN Special Functions Press the XY Zoom key XY ZoomPress the Copy Ratio key on the touch panel Following screen will appear Press the Y key XY ZoomCopy ratio in the vertical Y direction will be highlighted Press the Special Modes key Margin ShiftSpecial Modes screen will appear Margin Shift Select the desired shift amounts usingPress the Margin Shift key on the touch panel Select the shift direction Erase Setting screen for Erase will appearEdge + center erase Press the Erase key on the touch panel Erase on the touch panel. The selected erase mode will be Select the desired erase modeErase Highlighted Dual page Copying Information 4 Press the OK key Dual page CopyingEnsure that the desired tray is selected Bottom direction Centering Press the Centering key on the touch panel CenteringCentering key will be highlighted Press the Transparency Inserts key on the touch PanelTransparency Inserts key will be highlighted Infor 4 Press the OK key Transparency Film with Insert SheetsLoad transparency film into the bypass tray Key or Black Copy Start key Press the 2-SIDED Copy key and select the desired CoversDuplex selection window Covers Select cover placementNot Press the upper OK key Color Adjustments menu will appear Color Adjustments Press the RGB Adjust key on the touch panel Color AdjustmentsSelect a color to be adjusted Key to weaken the color Press the Sharpness key on the touch panel Setting screen for Sharpness will appear Press the upper OK key.SPECIALFUNCTIONS Coloradjustments Press the Suppress Background key on the touch Setting screen for Suppress Background will appear Use the and + keys to select the desired background Suppression levelLevel Brightness /INTENSITY /CONTRAST Use the and + keys to adjust the level Select the desired item to be adjustedSelected item Select BRIGHTNESS, Intensity or Contrast on Press the Image Edit key on the touch panel Image Editing FunctionsImage Edit menu will appear Press the Single Color key on the touch panel Image Editing FunctionsSelect the desired color Selected color key will be highlighted Press the NEG./POS. Reverse key on the touch Press the Image Edit key on the touch panelMode, the black and white areas will be reversed Relation to the NEG./POS. Reverse Reverse C D Mirror Image key will be highlighted Press the Mirror Image key on the touch panel Optional document feeder cannot be used with this function Place the original on the document glass Press the Photo Repeat key on the touch panel Setting screen for Photo Repeat will appearSelect the desired repeat type Select the copy paper size depending on the original size 11 x 17 FULL-BLEED To 100% when this function is selectedOriginal will be copied onto 12 x 18 size copy paper 11 x 17 FULL-BLEED key will be highlighted Press the 11 x 17 FULL-BLEED key on the touch panel Press the MULTI-PAGE Enlargement key on Touch panel Setting screen for MULTI-PAGE Enlargement will appearSelect the desired enlargement size Panel Select the original size Cancel OK Original Size & Orientation Either one or both can be set Setting screen for Image Edit selections will appear Adjust the original size on the Original Size tab Press the Auto Image key on the touch panel Press the upper OK key on the touch panelRefer to page 2-11 for the Auto Image function Types and sizes of copy paper Supplies Types and sizes of copy paper PaperLoading copy paper For best results, use only Sharp recommended paper Loading paper in the paper trays PaperPush the paper tray firmly back into the copier Tray holds 500 sheets of 20 lb. bond paper Load copy paper into the tray Changing the copy paper size in the trayPlace the paper size card in the front of the paper tray Open the front cover Adding Toner Left example shows the toner hopper of black toner Adding TonerIt will take about 40 seconds for the cartridge to empty Supplies Adding toner Disengage and remove the container from the copier Used Toner DisposalOpen the toner collecting container cover Push once on the door to unlatch and open it Proper storage Storage of SuppliesStore the supplies in a location that is Store copy paper in the wrapper and lying flatPage Copier TROUBLE? Misfeed Removal When a misfeed occurs, the copier will stopMisfeed in the optional Radf Misfeed in the bypass tray Misfeed RemovalOpen the feeding roller cover and pull the original gently Open the exit roller cover and gently pull the original out Do not pull out the paper transport in this step Turn the transport lever to the left Close the front cover Misfeed in the paper traysOpen the right side covers If the paper cannot be seen from the side, pull out Open the front cover Turn the transport lever to the left Misfeed in the transport area, exit area and fusing areaCheck to see if any paper is misfed in the exit area Close the paper tray and the side covers Gently close the upper right side cover Remove the misfed paper Misfeed in the optional duplex module Slide the paper guide if needed Push the duplex module back into the copier When the message Ready to COPY. Maintenance Required Maintenance Required Toner Collecting Container of Transfer Unit Troubleshooting Self-diagnostic function TroubleshootingExample General Information Part Names and Functions Part Names and Functions Color Copy Start key and indicator Interrupt key and indicator pBlack Copy Start key and indicator LCD touch panel Initial settings Custom Settings keyInformation key p Sided Copy key Document glass and document cover User Maintenance Contrast Contrast of the touch panel can be adjusted as below Copier Specifications Reversing Automatic Document Feeder optional SpecificationsDuplex Module optional Page Optional Equipment Staple cartridge replacement System Configuration Part Names BIN Staple Sorter AR-SS2 BIN Staple Sorter AR-SS2 Using the staple sorter Sorter Capacity Staple sort Using the document glass Up to 20 sets can be made Using the optional Radf Manual stapling Press the manual staple key when it lights upSet of copies will be stapled Remove the empty staple cartridge from inside Staple box Staple cartridge replacement Remove the rear paper and tape from the cartridge Return the lever to its original position Staple jam removal BIN Staple Sorter AR-SS2 Misfeed removal Copier will stop when a misfeed occursSlide the sorter back toward the copier and latch it into Paper Weight 13 ~ 28 lbs Specifications17 ~ 28 lbs 2 x 11 x 12 x Large Capacity Tray AR-LC2 Paper size 2 x Paper weight 15 lbs. to 28 lbs Large Capacity Tray AR-LC2 When the button lamp goes out, pull the paper tray outFan the copy paper Load the paper onto the feed table Remove any misfed paper from the copier and the large Capacity trayBe sure not to tear the misfed paper during removal Remove the misfed paper Gently push the tray back into place Finisher AR-FN4 NON Offset mode Offset modeFinisher AR-FN4 Offset stack Printed output will be stapled Staple print Replace the staple as follows When the staple cartridge is empty, the message Slide Optionalequipment Staple jam removal FN4 Misfeed removal Finisher AR-FN4 Page Offset stack Staple print Staple cartridge replacement Remove the rear paper and tape from the cartridge Staple jam removal FN4 Misfeed removal Finisher AR-FN4 Page Staple print Optional EQUIPMENT7 Optionalequipment Staple jam removal Finisher AR-FN4 Misfeed removal Finisher AR-FN4 Page Page Sharp Corporation