Safety Precautions | Sharp AR-C250 instruction

CAUTIONS

CHAPTER1 GETTING STARTED Cautions

Cautions on laser

Wave length	+10 nm
Wave length	785 nm - 15 nm
Pulse times	(4.374 µs ±4.4 ns)/7 mm

Output power	0.25 mW - 0.45 mW

SAFETY PRECAUTIONS

This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that the copier does not produce hazardous laser radiation. For your safety, observe the precautions below.

●Do not remove the cabinet, operation panel or any other covers.

●The copier’s exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges or other items into switch slots.

Caution

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

1-4

Image 16

Sharp AR-C250 operation manual Safety Precautions

Contents

AR-C250 Easily accessible For Your Records Color Copying with Special Features Color Copy Samples Neg./Pos. Reverse See Multi-page Enlargement See Adjustments for Color Copying Photo RGB Adjust See Sharpness See Brightness/intensity/contrast See Color Balance Contents Using this Manual Introduction How to use the touch panel Chapter Installation Requirements Getting Started Cautions Safety Precautions Power on and OFF Become possible Power on and OFF Power save modesSleep mode Preheat mode Information Function Press the Information key in the standby modeScreen for the information categories will appear How to use the touch panel Using the Touch PanelSelection of function Using the Touch Panel Function setting iconsPage Making Copies Special Papers manual feed Auditing Accounts Copy Start key is pressed Sided copies of 1-sided originals Close the document coverUse the 10-key pad to enter the desired number Copies Making Copies Copying from Sided copies from 1-sided originals Copying from the Document GlassPress the Color Copy Start key or Black Copy the reminder of the originals in reverse order Number will be changed to 1 when a Start key is pressedCopy the originals in reverse order Using the Radf Stream feeding mode Adjust the original guides to the size of the originals Using the RadfSet the originals face up in the document feeder tray Auto Adjust the original guides to the size of the originals Sided copies from 2-sided originals Original 2-sided Copies 1-sided REDUCTION/ENLARGEMENT/ZOOM Automatic selection REDUCTION/ENLARGEMENT/ZOOM Manual selection Clear Special Papers manual feed Two-sided copying with bypass tray Automatic Exposure AdjustmentsOriginal image type Printed PHOTO, PHOTO, or MAP depending on the original Exposure AdjustmentsPress the Exposure key on the touch panel JOB Memory Storing a job programPress the Program key Press the STORE/DELETE key on the touch panel Deleting a stored job program JOB MemoryRecalling a job program Interrupting a Copy RUN Special Functions XY Zoom Press the XY Zoom keyPress the Copy Ratio key on the touch panel Following screen will appear Press the Y key XY ZoomCopy ratio in the vertical Y direction will be highlighted Press the Special Modes key Margin ShiftSpecial Modes screen will appear Select the desired shift amounts using Margin ShiftPress the Margin Shift key on the touch panel Select the shift direction Setting screen for Erase will appear EraseEdge + center erase Press the Erase key on the touch panel Select the desired erase mode Erase on the touch panel. The selected erase mode will beErase Highlighted Dual page Copying Information 4 Press the OK key Dual page CopyingEnsure that the desired tray is selected Centering Bottom direction Press the Centering key on the touch panel CenteringCentering key will be highlighted Press the Transparency Inserts key on the touch PanelTransparency Inserts key will be highlighted Transparency Film with Insert Sheets Infor 4 Press the OK keyLoad transparency film into the bypass tray Key or Black Copy Start key Press the 2-SIDED Copy key and select the desired CoversDuplex selection window Select cover placement CoversNot Press the upper OK key Color Adjustments Color Adjustments menu will appear Color Adjustments Press the RGB Adjust key on the touch panelSelect a color to be adjusted Key to weaken the color Setting screen for Sharpness will appear Press the Sharpness key on the touch panel Press the upper OK key.SPECIALFUNCTIONS Coloradjustments Setting screen for Suppress Background will appear Press the Suppress Background key on the touch Use the and + keys to select the desired background Suppression levelLevel Brightness /INTENSITY /CONTRAST Select the desired item to be adjusted Use the and + keys to adjust the levelSelected item Select BRIGHTNESS, Intensity or Contrast on Press the Image Edit key on the touch panel Image Editing FunctionsImage Edit menu will appear Image Editing Functions Press the Single Color key on the touch panelSelect the desired color Selected color key will be highlighted Press the Image Edit key on the touch panel Press the NEG./POS. Reverse key on the touchMode, the black and white areas will be reversed Relation to the NEG./POS. Reverse Reverse C D Press the Mirror Image key on the touch panel Mirror Image key will be highlighted Place the original on the document glass Optional document feeder cannot be used with this function Setting screen for Photo Repeat will appear Press the Photo Repeat key on the touch panelSelect the desired repeat type Select the copy paper size depending on the original size 11 x 17 FULL-BLEED To 100% when this function is selectedOriginal will be copied onto 12 x 18 size copy paper Press the 11 x 17 FULL-BLEED key on the touch panel 11 x 17 FULL-BLEED key will be highlighted Setting screen for MULTI-PAGE Enlargement will appear Press the MULTI-PAGE Enlargement key on Touch panelSelect the desired enlargement size Panel Cancel OK Original Size & Orientation Select the original size Setting screen for Image Edit selections will appear Either one or both can be set Adjust the original size on the Original Size tab Press the Auto Image key on the touch panel Press the upper OK key on the touch panelRefer to page 2-11 for the Auto Image function Supplies Types and sizes of copy paper Paper Types and sizes of copy paperLoading copy paper For best results, use only Sharp recommended paper Paper Loading paper in the paper traysPush the paper tray firmly back into the copier Tray holds 500 sheets of 20 lb. bond paper Load copy paper into the tray Changing the copy paper size in the trayPlace the paper size card in the front of the paper tray Adding Toner Open the front cover Left example shows the toner hopper of black toner Adding TonerIt will take about 40 seconds for the cartridge to empty Supplies Adding toner Used Toner Disposal Disengage and remove the container from the copierOpen the toner collecting container cover Push once on the door to unlatch and open it Storage of Supplies Proper storageStore the supplies in a location that is Store copy paper in the wrapper and lying flatPage Copier TROUBLE? Misfeed Removal When a misfeed occurs, the copier will stopMisfeed in the optional Radf Misfeed Removal Misfeed in the bypass trayOpen the feeding roller cover and pull the original gently Open the exit roller cover and gently pull the original out Turn the transport lever to the left Do not pull out the paper transport in this step Misfeed in the paper trays Close the front coverOpen the right side covers If the paper cannot be seen from the side, pull out Misfeed in the transport area, exit area and fusing area Open the front cover Turn the transport lever to the leftCheck to see if any paper is misfed in the exit area Close the paper tray and the side covers Gently close the upper right side cover Remove the misfed paper Misfeed in the optional duplex module Push the duplex module back into the copier Slide the paper guide if needed Maintenance Required When the message Ready to COPY. Maintenance Required Toner Collecting Container of Transfer Unit Troubleshooting Self-diagnostic function TroubleshootingExample General Information Part Names and Functions Part Names and Functions Interrupt key and indicator p Color Copy Start key and indicatorBlack Copy Start key and indicator LCD touch panel Custom Settings key Initial settingsInformation key p Sided Copy key User Maintenance Document glass and document cover Contrast of the touch panel can be adjusted as below Contrast Specifications Copier Reversing Automatic Document Feeder optional SpecificationsDuplex Module optional Page Staple cartridge replacement Optional Equipment System Configuration BIN Staple Sorter AR-SS2 Part Names Using the staple sorter BIN Staple Sorter AR-SS2 Sorter Capacity Using the document glass Staple sort Using the optional Radf Up to 20 sets can be made Manual stapling Press the manual staple key when it lights upSet of copies will be stapled Staple cartridge replacement Remove the empty staple cartridge from inside Staple box Remove the rear paper and tape from the cartridge Staple jam removal Return the lever to its original position BIN Staple Sorter AR-SS2 Misfeed removal Copier will stop when a misfeed occursSlide the sorter back toward the copier and latch it into Specifications Paper Weight 13 ~ 28 lbs17 ~ 28 lbs 2 x 11 x 12 x Paper size 2 x Paper weight 15 lbs. to 28 lbs Large Capacity Tray AR-LC2 When the button lamp goes out, pull the paper tray out Large Capacity Tray AR-LC2Fan the copy paper Load the paper onto the feed table Remove any misfed paper from the copier and the large Capacity trayBe sure not to tear the misfed paper during removal Remove the misfed paper Gently push the tray back into place Finisher AR-FN4 Offset mode NON Offset modeFinisher AR-FN4 Offset stack Staple print Printed output will be stapled When the staple cartridge is empty, the message Slide Replace the staple as follows Optionalequipment Staple jam removal FN4 Misfeed removal Finisher AR-FN4 Page Offset stack Staple print Staple cartridge replacement Remove the rear paper and tape from the cartridge Staple jam removal FN4 Misfeed removal Finisher AR-FN4 Page Staple print Optional EQUIPMENT7 Optionalequipment Staple jam removal Finisher AR-FN4 Misfeed removal Finisher AR-FN4 Page Page Sharp Corporation