Sharp AR-C250 operation manual Staple jam removal

FINISHER (AR-FN4)

Staple jam removal

If staples become jammed in the stapler, the message “CHECK STAPLER POSITION OR STAPLE JAM” will appear. Remove the jammed staples in the manner described below:

OPTIONAL EQUIPMENT7

Finisher (AR-FN4) CHAPTER

1

2

3

4

While holding the finisher release lever, slide the finisher away from the copier.

Pull out the staple box.

●To prevent bumping or scraping your hand during removal of the staple box, proceed as shown in the illustration and as follows:

Grasp the staple box with your thumb and index finger, and place the heel of your hand against the finisher frame as shown with arrow 1 in the illustration.

Remove the staple box in the direction of arrow 2 by squeezing with your fingers and rotating against the heel of your hand.

Lower the lever at the end of the staple box and remove the jammed staples.

Return the lever to its original position.

7-24